Virtual Console FCD-CFxx Technické informace stáhnout pdf (Strana 796)

100

101

• <Enclosure Management Module Name> = "EMM 0 in Enclosure 0 on Connector 1 of RAID Controller

in Slot 2"

4.3.5.3 ENC3 : "<Enclosure Name> is shutdown."

When event is generated, message will have the following substitutions:

• <Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

4.3.5.4 ENC12 : "Communication resumed on <Enclosure Name>."

When event is generated, message will have the following substitutions:

• <Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

4.3.5.5 ENC14 : "The number of enclosures connected on <controller name> has exceeded

the maximum limit supported by the controller."

When event is generated, message will have the following substitutions:

• <controller name> = "port 0 of Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

4.3.5.6 ENC18 : "Communication with <enclosure name> was lost."

When event is generated, message will have the following substitutions:

• <enclosure name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

4.3.5.7 ENC19 : "<Enclosure Management Module Name> has failed."

When event is generated, message will have the following substitutions:

• <Enclosure Management Module Name> = "EMM 0 in Enclosure 0 on Connector 1 of RAID Controller

in Slot 2"

4.3.5.8 ENC22 : "The <Enclosure Name> has a bad sensor <args>."

When event is generated, message will have the following substitutions:

• <Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

• <args> = " not implemented"

4.3.5.9 ENC23 : "<enclosure name> - Issue with PHY <PHY data>."

When event is generated, message will have the following substitutions:

• <enclosure name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

• <PHY data> = " not implemented"

4.3.5.10 ENC24 : "Communication with <enclosure name> is intermittent."

When event is generated, message will have the following substitutions:

• <enclosure name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"

4.3.5.11 ENC25 : "<enclosure name> has a hardware error."

When event is generated, message will have the following substitutions:

796

1 2 ... 791 792 793 794 795 796 797 798 799 800 801 ... 919 920

Virtual Console FCD-CFxx Technické informace Strana 796

Komentáře k této Příručce