Virtual Console FCD-CFxx Technické informace Strana 1

Dell Test Event Notification Message Reference2014/10/07

4.1.13 Subcategory= Power Usage [MessageID prefix =POW]...7014.1.14 Subcategory= Power Supply [Message

2.2.16.16 LOG504 : "Chassis Log Export was successful." 2.2.16.17 LOG505 : "Cannot access network share." 2.2.16.18 LOG506 : "

2.2.17.5 NIC005 : "Mismatch in AttributeName and AttributeValue count" 2.2.17.6 NIC006 : "A configuration job already exists, Cannot se

2.2.17.17 NIC017 : "Unable to delete vFlash pending one-time boot configuration" 2.2.17.18 NIC018 : "Invalid BIOS password." 2.2.1

system." 2.2.18.21 OSD21 : "Unable to boot to ISO image." 2.2.18.22 OSD22 : "Unable to detach ISO image from the host." 2.2.1

and is in progress." 2.2.18.63 OSD063 : "The process of installing an operating system or hypervisor is successfully completed." 2.2.18

• <device name> = "device name"2.2.20.5 PR5 : "The configuration values stored for the previous device could not be applied to de

2.2.20.16 PR16 : "Some of the configuration values could not be applied to device: <device name>" When event is generated, message wil

• <job ID> = "JID_432156780987"2.2.20.35 PR35 : "Power Supply slot <PS slot number> firmware update will be performed durin

2.2.22.5 RAC005 : "Mismatch in AttributeName and AttributeValue count." 2.2.22.6 RAC006 : "AttributeValue cannot be changed for ReadOnl

2.2.22.16 RAC016 : "Invalid AttributeName." 2.2.22.17 RAC017 : "Job created to apply the attribute value." 2.2.22.18 RAC018 : &quo

4.3.5 Subcategory= Storage Enclosr [MessageID prefix =ENC]...7954.3.6 Subcategory= Fan Event [MessageID

• <parameter> = "parameter"2.2.22.40 RAC040 : "Missing parameters <parameters>." When event is generated, message will

2.2.22.57 RAC057 : "Unable to set Privacy Protocol to an enabled state because the Authentication Protocol attribute is set to None for the user

2.2.22.64 RAC064 : "iDRAC was successfully reset." 2.2.22.65 RAC065 : "iDRAC reset operation was not successful." 2.2.22.66 RAC066

job queue." When event is generated, message will have the following substitutions:• <import or export job ID> = "123456789"2.2.2

2.2.22.101 RAC0661 : "Storage configuration operation - #(operation) is pending on the selected #{devicetype} : #{devicename}." 2.2.22.102 R

invoked by the <user name>." When event is generated, message will have the following substitutions:• <user name> = "root"2

2.2.22.134 RAC939 : "Unable to start the system configuration profile export or import operation." 2.2.22.135 RAC940 : "Unable to start

in recovery state," 2.2.22.158 RAC963 : "Unable to retrieve the status of Lifecycle Controller." 2.2.22.159 RAC964 : "Unable to pe

(PKCS12) file." 2.2.22.179 RAC985 : "Unable to configure the cfgServerBootOnce object." 2.2.22.180 RAC986 : "The "vmkey"

2.2.22.188 RAC994 : "Unable to run the "jobqueue delete --all" command." 2.2.22.189 RAC995 : "Unable to retrieve the hardware

4.4.31 Subcategory= Software Config [MessageID prefix =SWC]... 8814.4.32 Subcategory= System Info [MessageID

2.2.22.202 RAC1008 : "The Active Directory object DCLookupByUserDomain cannot be disabled." 2.2.22.203 RAC1009 : "The Active Directory

• <Job ID or ALL> = "123456789"2.2.22.225 RAC1033 : "Unable to retrieve the server component software inventory." 2.2.22.226

2.2.22.235 RAC1044 : "The Automatic Update (autoupdate) feature is not enabled." 2.2.22.236 RAC1045 : "Specifying ftp.dell.com as the c

2.2.22.243 RAC1052 : "The Automatic Backup (autobackup) feature is not enabled." 2.2.22.244 RAC1053 : "Unable to view the Automatic Bac

2.2.22.258 RAC1068 : "Unable to set minimum non critical threshold value of <System Board Inlet Temp>, because the value entered is greater

2.2.22.264 RAC1109 : "Unable to run the command, because an incorrect Share type is entered." 2.2.22.265 RAC1110 : "Unable to run the c

2.2.22.270 RAC1115 : "Unable to run the command, because of insufficient user privileges." 2.2.22.271 RAC1116 : "Unable to run the comm

to a remote share." 2.2.22.292 RAC1141 : "The iDRAC firmware rollback operation was initiated." 2.2.22.293 RAC1142 : "Unable to st

2.2.22.296 RAC1145 : "The entered log type is invalid." 2.2.22.297 RAC1146 : "Unable to set the SNMPv3 username because SNMPv3 is not e

2.2.22.313 RAC1164 : "A remote diagnostics operation is currently running and not completed." 2.2.22.314 RAC1165 : "Unable to configure

11.0 IntroductionThe Test Event Generation Message Reference contains the notification message content generated by the Dell iDRAC8 with Lifecycle Con

2.2.22.316 RAC1168 : "The RACADM "getconfig" command will be deprecated in a future version of iDRAC firmware." 2.2.22.317 RAC1169

• <parameter> = "Param1"131

2.2.23.5 RED074 : "A required parameter is not present." 2.2.23.6 RED075 : "An Automatic Backup schedule already exists." 2.2.24

job for the device already exists." 2.2.26.19 STOR024 : "Unable to create a configuration job because a configuration job for the device alr

• <attribute name> = "DiskCachePolicy"2.2.26.35 STOR042 : "Unsupported value for AttributeName <attribute name>" When

2.2.26.41 STOR048 : "Controller is not Dell Key Management capable." 2.2.26.42 STOR049 : "Controller is in Local Key Management mode.&q

Lifecycle Controller version on the server does not have the necessary capabilities." 2.2.26.62 STOR069 : "Unable to run the <method name

2.2.26.65 STOR072 : "iDRAC Service Module (ISM) is either not present or not running on the server OS." 2.2.26.66 STOR073 : "The iDRAC

present on the controller. Delete the preserved cache and retry the operation." 2.2.26.83 STOR0701 : "Storage objects are unavailable in the

2.2.26.85 STOR034 : "Invalid parameter value for RebootJobType." 2.2.27 Subcategory= Software Config [MessageID prefix =SWC]2.2.27.1 SWC000

Example message subsection:1.1 FSD000 : "Debug authorized by customer; debugcaps: <DebugCaps>, was authorized by: <iDRAC User>, at &l

Controller GUI." 2.2.27.23 SWC0028 : "The backup Server Profile operation did not successfully complete." 2.2.27.24 SWC0029 : "Una

share folder." 2.2.27.67 SWC0072 : "Unable to export the Tech Support Report to destination folder." 2.2.27.68 SWC0073 : "Unable t

2.2.27.72 SWC0077 : "Unable to initiate the Repurpose or Retire System operation." 2.2.27.73 SWC0101 : "Unable to read available log re

configured before a CSR can be generated." 2.2.27.101 SWC0129 : "Unable to send test email. Please make sure that your email alerts\nhave be

2.2.27.112 SWC0140 : "RAC reset operation initiated successfully. It may take up to a minute \nfor the RAC to come back online again." 2.2.2

know Remote File Share is ENABLED or DISABLED." 2.2.27.148 SWC0216 : "The -c option requires -l to also be specifed." 2.2.27.149 SWC021

AutoConfig is enabled." 2.2.27.172 SWC0240 : "The IPv6 DNS Server IP address is not allowed to be configured if IPv6 DNS Server DHCP (cfgIPv

2.2.27.184 SWC0252 : "No options were specified. The subcommand requires options to be used." 2.2.27.185 SWC0253 : "Unable to allocate

• <index> = "1"2.2.27.213 SWC0281 : "The specified object is READ ONLY and cannot be modified." 2.2.27.214 SWC0282 : "T

• <index number> = "1"149

Trap/EventID The identification number used as the Trap ID for SNMP alert traps and as the Event ID when the message is logged in operating system log

2.2.27.225 SWC0293 : "The specified object is not recognized by iDRAC." 2.2.27.226 SWC0294 : "Invalid group name specified." 2.2.2

in read-only mode." 2.2.27.261 SWC0722 : "Error occurred while resetting to defaults. The reset command was not accepted." 2.2.27.262 S

• <user name> = "UserName"2.2.27.277 SWC1925 : "The iDRAC Quick Sync access feature is set to the Disabled mode." 2.2.27.278

2.2.28 Subcategory= System Info [MessageID prefix =SYS]2.2.28.1 SYS001 : "The operation was successful." 2.2.28.2 SYS002 : "Unable to

2.2.28.11 SYS011 : "Pending configuration values are already committed, unable to perform another set operation." 2.2.28.12 SYS012 : "U

2.2.28.27 SYS030 : "Collecting component configuration information." 2.2.28.28 SYS031 : "Updating component configuration." 2.2.28

• <line> = " linenumber"2.2.28.46 SYS050 : "The system configuration XML file for import configuration is not compliant with sche

2.2.28.61 SYS065 : "Input file for import configuration operation cannot be found or opened." 2.2.28.62 SYS066 : "No changes detected f

imported to the system." 2.2.28.80 SYS088 : "Estimated time for applying configuration changes is <configuration time> seconds."

• <job ID> = "JID_123456789098"2.2.28.97 SYS152 : "Erase operations for some System Erase tasks did not complete successfully.&qu

22.0 Email Event Notification Test Messages 2.1 Category: Audit2.1.1 Subcategory= BIOS Management [MessageID prefix =BIOS]2.1.1.1 BIOS102 : "A s

2.2.28.101 SYS156 : "Erase operations for System Erase tasks successfully completed." 2.2.28.102 SYS157 : "Unable to successfully compl

2.2.29.5 TST104 : "SNMP traps not configured." 2.2.29.6 TST105 : "Invalid parameter value for <parameter name>." When event

2.2.30.14 UEFI0073 : "Unable to boot <Boot Option name> because of the Secure Boot policy." When event is generated, message will have

• <slot number> = "B2"2.2.30.24 UEFI0092 : "The number of DIMM ranks has exceeded the maximum allowed ranks per channel limit.&qu

2.2.30.35 UEFI0105 : "Unable to enable the Cluster on Die (COD) feature because of an unsupported memory configuration." 2.2.30.36 UEFI0113

• <parameter name> = "parameter name"2.2.31.4 USR103 : "Missing parameters <parameter names>." When event is generated

2.2.32.5 VF005 : "Empty partition creation successful" 2.2.32.6 VF006 : "Empty partition creation failed" 2.2.32.7 VF007 : "I

could not be initialized." 2.2.33.13 VFL0713 : "One or more partitions are currently attached; the SD card could not be initialized." 2

2.3.1.4 BAT1003 : "The battery on <controller name> learn cycle has completed." When event is generated, message will have the followi

• <Controller name> = "RAID Controller in Slot 5"2.3.1.13 BAT1012 : "The <Controller name> battery temperature is above nor

2.1.2.6 CMC8511 : "Unable to synchronize the data in the Extended Storage removable flash media in the primary and secondary CMCs." 2.1.2.7

2.3.1.22 BAT1021 : "The charge level for the battery on <controller name> is below the normal threshold." When event is generated, mes

2.3.1.31 BAT1030 : "The <Controller name> battery charge level is normal." When event is generated, message will have the following su

2.3.3 Subcategory= Storage Contr [MessageID prefix =CTL]2.3.3.1 CTL1 : "Controller event log: <message>" When event is generated, mes

• <Controller name> = "RAID Controller in Slot 5"2.3.3.11 CTL11 : "Configuration on <controller name> was reset." When

• <Controller name> = "RAID Controller in Slot 5"2.3.3.20 CTL21 : "Abort CC on Error and Load Balance has changed for <Control

2.3.3.29 CTL30 : "The Check Consistency rate has changed for <Controller name>." When event is generated, message will have the follow

• <Controller name> = "RAID Controller in Slot 5"2.3.3.39 CTL40 : "Multi-bit ECC error on <Controller name> DIMM." Whe

2.3.3.48 CTL49 : "The NVRAM has corrupted data on <Controller name>." When event is generated, message will have the following substit

2.3.3.57 CTL58 : "<Controller name> SAS SMP communications error <args>" When event is generated, message will have the followin

• <Controller name> = " RAID Controller in Slot 5"2.3.3.65 CTL66 : "Attempted to import Unsupported Virtual Disk type RAID<arg

• <slot id> = ""2.1.2.17 CMC8542 : "The CMC <slot id> was restarted because of a manual reset." When event is generate

• <controller name> = "RAID Controller in Slot 5"2.3.3.74 CTL75 : "Preserved cache discarded on <controller name>." Wh

• <controller name> = "RAID Controller in Slot 5"2.3.3.83 CTL84 : "<controller name> is running an unsupported firmware ver

• <controller name> = "RAID Controller in Slot 6"2.3.3.92 CTL93 : "<controller name> has been successfully changed to opera

• <controller name> = "RAID Controller in Slot 5"2.3.3.101 CTL102 : "The <controller name> is enabled." When event is

• <controller name> = "Controller 1 (PERC H800 Adapter)"2.3.3.108 CTL206 : "Abort Check Consistency on Error and Auto Copyback on

• <controller name> = "Controller 1 (PERC H800 Adapter)"2.3.3.117 CTL215 : "Redundant path disconnected on <Controller Name>

2.3.4.6 DIAG0146 : "Hard Drive <Drive Location> - S/N <Serial Number>, self test log contains previous error(s)." When event is

• <80000000000000??> = "800000000018"• <Error Reason> = ""2.3.4.14 DIAG0155 : "Hard Drive - Not installed."

2.3.4.20 DIAG8160 : "PERC Battery <PERC Controller Location> - incorrect status = <80000000000000??>\n<Error Reason>." Whe

2.3.5.8 ENC8 : "The <Enclosure Name> alarm was disabled." When event is generated, message will have the following substitutions:• <

2.1.2.25 CMC8553 : "An internal error occurred and a failover condition is detected." 2.1.2.26 CMC8554 : "An internal network error occ

• <Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"2.3.5.17 ENC17 : "An Enclosure Management Module (E

• <enclosure name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"2.3.5.26 ENC27 : "SAS or SATA mixing of physical di

• <enclosure name> = "Enclosure 0:0 on Controller 1 at Connector 0"2.3.6 Subcategory= Fan Event [MessageID prefix =FAN]2.3.6.1 FAN100

2.3.7.6 FLDC1007 : "The cache device <physical disk Name> with WWN = <World Wide Name> and path = <device pathname> is removed.

2.3.7.14 FLDC1016 : "A valid permanent license is installed for Fluid Cache." 2.3.7.15 FLDC1017 : "A license has been installed for Flu

2.3.7.22 FLDC1024 : "Caching was enabled in write-back mode, but it is currently operating in write-through mode." 2.3.7.23 FLDC1025 : "

2.3.7.35 FLDC1037 : "Configuration changes are disabled, because Fluid cache is running on an expired or invalid license." 2.3.7.36 FLDC1038

• <PD Name> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"2.3.8.9 PDR9 : "Initialization has started on &l

• <PD Name> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"2.3.8.19 PDR19 : "SMART FPT exceeded for <PD

• <PD Name> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"2.3.8.29 PDR29 : "Rebuild on <PD Name> com

Notes, Cautions, and WarningsNOTE: A NOTE indicates important information that helps you make better use of your computer.CAUTION: A CAUTION indicates

• <slot number> = ""2.1.2.39 CMC8570 : "The server slot <slot number> is disabled for DVD drive mapping." When event i

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"2.3.8.39 PDR39 : "A blink operation has in

• <PD Name> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"2.3.8.49 PDR50 : "Insufficient space on the glob

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"2.3.8.59 PDR60 : "Error occurred on <ph

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"2.3.8.69 PDR70 : "Copyback started from &l

2.3.8.78 PDR79 : "A user terminated Copyback from <physical disk> to <physical disk>." When event is generated, message will hav

2.3.8.87 PDR93 : "Microcode update on <physical disk> has completed." When event is generated, message will have the following substit

2.3.8.97 PDR104 : "The <PCIe solid state device name> has turned off because the critical temperature threshold is exceeded." When eve

• <PCIe solid state device name> = "PCIe Solid-State Drive in Slot 9 in Bay 1"2.3.8.106 PDR114 : "The <PCIe solid state device

• <physical disk name> = "Physical Disk 1:0:5 on Controller 0 at Connector 1"2.3.8.115 PDR211 : "<physical disk name> has e

2.3.9.4 PSU1003 : "<PSU Sensor Name> is switched OFF." When event is generated, message will have the following substitutions:• <PS

• <Username> = "admin"2.1.3.4 DKM0004 : "DKM Error Code <Error_code_name>: <Error_code_msg> error." When event i

2.3.10 Subcategory= RAC Event [MessageID prefix =RAC]2.3.10.1 RAC0500 : "There are no batteries to be displayed." 2.3.10.2 RAC0501 : "

2.3.11.4 SSD1004 : "Exported the <PCIe SSD name> log file." When event is generated, message will have the following substitutions:• &

• <args> = "CDB:xyz, Sense:abc"2.3.12.3 STOR3 : "CEM Storage Management has lost communication with the <Controller Name>.&

2.3.12.6 STOR6 : "CEM Storage Management detected inventory change(s) after host re-boot." 2.3.12.7 STOR7 : "The storage management ins

2.3.12.22 STOR0101 : "No RAID controller is displayed." 2.3.12.23 STOR0102 : "No batteries are displayed." 2.3.12.24 STOR0103 : &q

2.3.12.36 STOR0203 : "The current operating system kernel version and the non-RAID SCSI driver version are older than the minimum required versio

2.3.12.46 STOR0501 : "Unable to configure RAID." 2.3.12.47 STOR0502 : "Unable to launch RAID Configuration wizard." 2.3.12.48 STOR

2.3.14.3 TMP7 : "<Temp Sensor Name> has failed." When event is generated, message will have the following substitutions:• <Temp Sen

• <VD Name> = "Virtual Disk 0 on Integrated RAID Controller 1"2.3.15.4 VDR4 : "<virtual disk> was created." When event

• <VD Name> = "Virtual Disk 0 on Integrated RAID Controller 1"2.3.15.14 VDR14 : "The consistency check on <virtual disk> wa

• <feature name> = ""2.1.6 Subcategory= Debug [MessageID prefix =FSD]2.1.6.1 FSD000 : "Debug authorized by customer; debugcaps:

• <virtual disk> = "Virtual Disk 0 on Integrated RAID Controller 1"2.3.15.24 VDR24 : "Reconfiguration of <virtual disk> has

• <virtual disk> = "Virtual Disk 0 on Integrated RAID Controller 1"2.3.15.35 VDR35 : "Background initialization has completed for

2.3.15.44 VDR44 : "<VD Name> disk cache policy has changed." When event is generated, message will have the following substitutions:•

2.3.15.53 VDR53 : "The consistency check logging of inconsistent parity data is disabled for <virtual disk>." When event is generated,

2.3.15.62 VDR93 : "<VD Name> bad block medium error is cleared." When event is generated, message will have the following substitution

• <virtual disk names> = "Virtual Disk 1 (Virtual Disk 1) on Controller 0 (PERC 5/i Integrated)"2.3.15.71 VDR101 : "Virtual Adapt

• <virtual disk name> = "Virtual Disk 1 (Virtual Disk 1) on Controller 0 (PERC 5/i Integrated)"2.3.15.79 VDR109 : "Successfully d

2.4.1.4 AMP0303 : "The system board <name> current is greater than the upper critical threshold." When event is generated, message wil

2.4.1.13 AMP0312 : "System level current is less than the lower warning threshold." 2.4.1.14 AMP0313 : "System level current is less th

• <current> = " 100.000"2.4.1.29 AMP404 : "The <sensor name> sensor detected an error with a value of <current> A.&qu

2.1.7.2 HWC8001 : "A device was added to the system at this location: <device location>. Additional Details: <details>." When ev

• <day month date hh:mm:ss yyyy> = "Tue Jan 08 10:56:54 2013"2.4.2.17 ASR201 : "The watchdog timer restarted the system at <da

2.4.3.12 BAT0011 : "The storage battery for disk drive bay <bay> is operating normally." When event is generated, message will have th

2.4.3.21 BAT0030 : "The system board battery is reading low." 2.4.3.22 BAT0031 : "The system board battery status is unknown." 2.4

• <cable name> = "PERC SAS B0"• <bay ID> = "2"• <cable name> = "PCIe C"2.4.5 Subcategory= Chassis Man

• <slot number> = ""2.4.5.10 CMC8520 : "The FRU on server <slot number> is not functioning." When event is generated,

2.4.5.19 CMC8534 : "Unable to turn on the server <slot number> because the power requirement request exceeds the power cap value." Whe

2.4.6.9 CPU0008 : "CPU <number> is disabled." When event is generated, message will have the following substitutions:• <number>

• <number> = "1"2.4.6.19 CPU0701 : "CPU <number> protocol error detected." When event is generated, message will have

2.4.6.29 CPU0806 : "CPU <number> voltage regulator module is incorrectly configure." When event is generated, message will have the fo

• <Cpu Number> = "0"2.4.8.4 DIAG0114 : "Cache integrity test discrepancy <Error Reason>" When event is generated, mess

• <mode> = "USB-NIC"2.1.10.3 ISM0002 : "The OS to iDRAC Pass-through is disabled. The iDRAC Service Module is currently enabling

2.4.8.16 DIAG0213 : "System board - CMOS battery failure detected." 2.4.8.17 DIAG0221 : "System board - Interval timer not functional.&

• <Sensor Name> = "CPU1"• <Degrees> = "78"2.4.8.30 DIAG0315 : "Sensor: The (<Sensor Name>) reading <Degr

2.4.8.46 DIAG 0414 : "Cables - <Inverter Name> not detected." When event is generated, message will have the following substitutions:•

• <Name> = "CPU Thermistor"• <Decimal> = "7"• <Decimal> = "8"2.4.8.54 DIAG8003 : "Fan - Unable to

• <Decimal> = "1"2.4.8.64 DIAG8013 : "LCD <Name> doesnt support test commands." When event is generated, message will

2.4.8.74 DIAG8171 : "PCIe - PCI device in physical Slot <decimal>, PciTag <hex>, is present but not responding" When event is ge

2.4.9 Subcategory= Dell Key Mngr [MessageID prefix =DKM]2.4.9.1 DKM1000 : "A network problem detected. Cannot contact key management server.&quo

2.4.10.8 FAN0007 : "Fan <number> was inserted." When event is generated, message will have the following substitutions:• <number>

• <fan name> = "Blower"2.4.10.18 FAN0017 : "<fan name> RPM is within normal operating range." When event is generated,

2.4.10.26 FAN0026 : "The <sensor name> sensor detected an error with a value of <fan speed> RPM." When event is generated, messa

2.1.10.16 ISM0015 : "The iDRAC Service Module detected a change in the host name of the server operating system (OS)." 2.1.10.17 ISM0016 : &

• <name> = "KVM"2.4.12.4 HWC1003 : "The <name> is enabled." When event is generated, message will have the following s

2.4.12.19 HWC1200 : "The sled <sled name> is inserted in slot <slot number>." When event is generated, message will have the fol

• <name> = "DRAC"2.4.12.28 HWC2007 : "The <name> is installed correctly." When event is generated, message will have t

• <name> = "IOM"2.4.12.38 HWC3001 : "The <name> is inserted." When event is generated, message will have the following

2.4.12.49 HWC4011 : "Hardware unsuccessfully updated for mezzanine card <number>." When event is generated, message will have the foll

2.4.12.59 HWC5002 : "A fabric mismatch detected on <name>." When event is generated, message will have the following substitutions:• &

• <number> = "A1"2.4.12.69 HWC5032 : "A fabric mismatch detected on IO module <number>." When event is generated, mess

• <name> = "LCD"2.4.12.79 HWC6004 : "Cannot communicate with <name> controller." When event is generated, message will

• <number> = "1"2.4.12.88 HWC8004 : "The SD card device sensor has failed. SD card location: <location>, SD card device typ

• <state> = " NULL"2.4.12.94 HWC8501 : "Unable to complete the operation because of an issue with the I/O panel cable." 2.4.

2.1.12 Subcategory= Licensing [MessageID prefix =LIC]2.1.12.1 LIC000 : "The License Manager action succeeded." 2.1.12.2 LIC001 : "The

2.4.13.5 IOV108 : "Power fault detected on PCIE adapter <device name> in <slot type> <slot number>." When event is generat

• <slot number> = ""2.4.13.17 IOV2008 : "The Chassis Management Controller (CMC) is unable to communicate with the PCIe subsystem

• <log type> = "Command"2.4.15.3 LOG323 : "The log size is near maximum capacity. Log type: <log type>." When event is

2.4.16.6 MEM0005 : "Persistent correctable memory error limit reached for a memory device at location(s) <location>." When event is ge

2.4.16.15 MEM0022 : "Memory device at location <location> is absent." When event is generated, message will have the following substit

• <location> = "DIMM1"2.4.16.25 MEM1003 : "Memory device at location <location> failed to transition to in test." When

• <location> = "DIMM1"2.4.16.35 MEM1013 : "Memory device at location <location> is in a full state." When event is gen

• <location> = "DIMM1"2.4.16.46 MEM1206 : "Memory mirror redundancy is degraded. Check memory device at location <location>

2.4.16.57 MEM6004 : "Memory device status is critical. Memory device location: <location>, Possible memory module event cause: <cause>

• <QPI link number> = "1"2.4.16.68 MEM9005 : "Intel SMI 2 Memory interconnect <link number> has degraded." When event

operation." 2.1.12.24 LIC201 : "License <entitlement ID> assigned to device <device name> expires in <number of days> days

2.4.17.3 NIC500 : "The requested object is not allowed to be configured if DHCP \nis enabled." 2.4.17.4 NIC501 : "The requested object

<device> function <func>." When event is generated, message will have the following substitutions:• <bus> = "1"• <

• <bus> = "1"• <device> = "1"• <func> = "1"2.4.19.10 PCI1318 : "A fatal error was detected on a c

2.4.19.16 PCI1344 : "An I/O channel check error was detected." 2.4.19.17 PCI1346 : "A software error was detected on a component at slo

• <device> = "1"• <func> = "1"2.4.19.26 PCI2001 : "The component at bus <bus> device <device> functio

2.4.19.34 PCI3005 : "Device option ROM on mezzanine card <number> was successfully updated." When event is generated, message will hav

• <number> = "1"2.4.19.44 PCI3015 : "The component at slot <number> recovered from a non-fatal PCIe error." When event

• <slot number> = ""2.4.19.54 PCI5008 : "The Chassis Management Controller (CMC) is unable to communicate with the PCIe switch bo

• <bay> = "0"2.4.20.8 PDR1007 : "Rebuild is in progress for drive <number> in disk drive bay <bay>." When event

• <number> = "1"• <bay> = "0"2.4.20.16 PDR1023 : "Rebuild completed for drive <number> in disk drive bay &l

2.1.12.33 LIC210 : "License <entitlement ID> deleted from device <device name> successfully." When event is generated, message w

• <number> = "1"2.4.20.25 PDR1106 : "Drive <number> is in the failed array." When event is generated, message will hav

• <number> = "1"2.4.21 Subcategory= System Performance Event [MessageID prefix =PFM]2.4.21.1 PFM0001 : "The value of <sensor

2.4.22 Subcategory= BIOS POST [MessageID prefix =PST]2.4.22.1 PST0000 : "Unrecognized Post Code." 2.4.22.2 PST0001 : "System Power On.

• <number> = "1"2.4.23.2 PSU0001 : "Power supply <number> failed." When event is generated, message will have the foll

2.4.23.11 PSU0022 : "Power supply <number> is correctly configured." When event is generated, message will have the following substitu

• <number> = "1"2.4.23.21 PSU0039 : "An under current fault detected on power supply <number>." When event is generate

2.4.23.30 PSU0077 : "Power supply <number> vendor type mismatch detected." When event is generated, message will have the following su

2.4.23.39 PSU500 : "Unable to get the current server power status." 2.4.23.40 PSU501 : "Server is already powered ON." 2.4.23.41 P

• <number> = "1"2.4.23.51 PSU0904 : "Could not power down 240VA on power unit <number>." When event is generated, mess

• <number> = "1"2.4.24 Subcategory= PSU Absent [MessageID prefix =PSUA]2.4.24.1 PSUA0016 : "Power supply <number> is absen

2.1.13.6 LOG326 : "The Alert Log was cleared." 2.1.13.7 LOG327 : "An Alert Log backup was created." 2.1.13.8 LOG328 : "The Se

2.4.25.11 PWR200 : "Enabling the Max Power Conservation Mode (MPCM) feature will disable the Extended Power Performance (EPP) feature." 2.4.

• <slot number> = ""2.4.25.27 PWR220 : "The Extended Power Performance (EPP) feature cannot be enabled because slot <slot numb

2.4.25.28 PWR221 : "The Extended Power Performance (EPP) feature is already disabled." 2.4.25.29 PWR222 : "The Extended Power Performan

maintained." 2.4.25.51 PWR2202 : "The system is sleeping with lost processor context." 2.4.25.52 PWR2203 : "The system is sleeping

2.4.25.67 PWR8557 : "The System Input Power Cap is too low to be enforced using the current Power Supply configuration." 2.4.25.68 PWR8558 :

• <name> = "12v"2.4.27.20 RDU0031 : "The <name> voltage redundancy is lost." When event is generated, message will hav

2.4.28.7 RFL2007 : "Internal Dual SD Module <name> is writable." When event is generated, message will have the following substitution

2.4.30 Subcategory= FlexAddress SD [MessageID prefix =RFM]2.4.30.1 RFM1018 : "Removable Flash Media is absent." 2.4.30.2 RFM1019 : "Re

Module." 2.4.32 Subcategory= Security Event [MessageID prefix =SEC]2.4.32.1 SEC0000 : "The chassis is open." 2.4.32.2 SEC0001 : "

Technology (TXT) problem at boot." 2.4.32.24 SEC0045 : "Intel Trusted Execution Technology (TXT) is operating correctly." 2.4.32.25 SEC

Contents1.0 Introduction...131.1 FSD000 : "Deb

• <slot number> = ""2.1.17.2 PSU8502 : "The PSU in slot <slot number> detected 110 VAC input voltage and does not match cha

address>." When event is generated, message will have the following substitutions:• <username> = "root"• <IP address> =

2.4.33.11 SEL1200 : "The system was reconfigured." 2.4.33.12 SEL1202 : "OEM system boot." 2.4.33.13 SEL1204 : "An unknown sys

Insufficient resources to maintain normal operations." 2.4.33.40 SEL1506 : "Lost communications with Chassis Group Member <number>.&qu

• <number> = "1"2.4.34.4 SWC4005 : "A firmware or software incompatibility was corrected between iDRAC in slot <number> and

• <second component name> = " BIOS"• <second component location> = " in slot 1"2.4.34.12 SWC4013 : "A firmware or

2.4.34.16 SWC5003 : "System Controller (SC) has either stopped functioning or is updating a firmware version." 2.4.34.17 SWC5004 : "Sys

• <SDR> = " present"• <SEL> = " present"306

2.4.35.14 SYS115 : "The power cord sensor is non-functional." 2.4.35.15 SYS116 : "Unable to determine the status of the power cord.&quo

Lifecycle Controller is not enabled." 2.4.35.37 SYS138 : "Unable to start the collection of OS and Application Data because the server is tu

2.4.35.51 SYS181 : "Unable to collect OS and Application Data because the OS Collector is not installed on the iDRAC." 2.4.35.52 SYS182 : &q

2.1.17.12 PSU8513 : "Unable to complete the PSU slot <number> firmware update. Error=0x<error number>." When event is generated,

• <name> = "Inlet"2.4.36.6 TMP0105 : "The system board <name> temperature is within range." When event is generated, m

• <name> = "Planer"2.4.36.15 TMP0114 : "The <name> temperature is greater than the upper warning threshold." When even

2.4.36.19 TMP0118 : "The system inlet temperature is less than the lower warning threshold." 2.4.36.20 TMP0119 : "The system inlet temp

• <number> = "1"2.4.36.41 TMP0201 : "CPU <number> temperature is less than the lower critical threshold." When event i

2.4.36.51 TMP502 : "The <sensor name> sensor has returned to a normal state with a value of <temperature> degrees Celsius." When

2.4.37 Subcategory= Temperature Statistics [MessageID prefix =TMPS]2.4.37.1 TMPS0100 : "Inlet temperature is above warning level for extended du

in Recovery mode." 2.4.38.19 UEFI0018 : "Lifecycle Controller (LC) is unable to complete a requested task or function and therefore is in Re

2.4.38.29 UEFI0032 : "Unable to initialize the TPM chip because the TPM chip is not functioning." 2.4.38.30 UEFI0034 : "A CMOS battery

• <PCIe device> = "Bus: 0 Dev: 0 Func: 18"2.4.38.47 UEFI0067 : "A PCIe link training failure is observed in <PCIe device> a

2.4.38.61 UEFI0106 : "One or more memory correctable training errors have occurred on memory slot: <slot>" When event is generated, me

2.1.18 Subcategory= Power Usage [MessageID prefix =PWR]2.1.18.1 PWR2250 : "Unable to turn on the server because the chassis infrastructure not r

2.4.38.68 UEFI0115 : "The Management Engine firmware has recovered from one or more correctable errors." 2.4.38.69 UEFI0116 : "One or m

Controller (LC) firmware was not accessible." 2.4.38.86 UEFI0142 : "Unable to enter System Service Mode (SSM) because the Lifecycle Controll

2.4.40.3 VFL0005 : "No vFlash partitions exist." 2.4.40.4 VFL0007 : "No vFlash SD card is present." 2.4.40.5 VFL0009 : "vFlas

• <name> = "vFlash"2.4.40.20 VFL1006 : "Removable Flash Media <name> is offline." When event is generated, message wil

• <name> = "vFlash"2.4.40.30 VFL1016 : "Media not present for Removable Flash Media <name>." When event is generated,

2.4.42.6 VLT0105 : "Processor module <name> voltage is within range." When event is generated, message will have the following substit

• <number> = "A"• <name> = "VRM"2.4.42.15 VLT0208 : "The memory module <number> <name> voltage is gre

2.4.42.22 VLT0215 : "The disk drive bay <name> voltage is greater than the upper critical threshold." When event is generated, message

• <name> = "A"2.4.42.32 VLT0225 : "The memory module <name> voltage is less than the lower critical threshold." When e

• <name> = "VRM"2.4.42.40 VLT0233 : "The mezzanine card <number> <name> voltage is greater than the upper critical th

2.1.18.12 PWR2262 : "The Intel Management Engine has reported an internal system error." 2.1.18.13 PWR2263 : "User ignored Power Supply

2.4.42.47 VLT0304 : "CPU <number> <name> voltage is outside of range." When event is generated, message will have the following

• <voltage> = " 2"2.4.43 Subcategory= Virtual Console [MessageID prefix =VRM]2.4.43.1 VRM0009 : "No Virtual Media devices are cu

2.5.1 Subcategory= Job Control [MessageID prefix =JCP]2.5.1.1 JCP000 : "New" 2.5.2 Subcategory= Lifecycle Contr [MessageID prefix =LC]2.5.

was found on the Lifecycle Controller." 2.5.4.21 RED020 : "Feature not supported on current version of USC." 2.5.4.22 RED021 : "Th

• <component name> = "Firmware updates available : Enterprise UEFI Diagnostics, 4225A2, 4225.4, OS Drivers Pack, 7.2.0.7, A00, BIOS"2.

• <operation task> = "AutoTask"2.5.4.47 RED046 : "A recurring operation of type <operation type> was unable to create a job

2.5.4.57 RED056 : "An internal error occurred. Unable to complete the specified operation." 2.5.4.58 RED057 : "An internal error occurr

2.5.4.70 RED076 : "Unable to create an Automatic Update schedule, because an invalid parameter is entered." 2.5.4.71 RED077 : "Unable t

• <component name> = "Component"• <available firmware version> = "Available"• <installed firmware version> = &qu

2.5.4.89 RED095 : "rSPI update for Diags failed." 2.5.4.90 RED0101 : "Rollback successfull." 2.5.5 Subcategory= FW Update Job [Me

2.1.18.23 PWR8509 : "Unable to change the server power priority because Server Based Power Management mode is enabled." 2.1.18.24 PWR8510 :

• <parameter> = "Param1"2.5.5.22 SUP027 : "Missing required parameter <parameter>" When event is generated, message wi

2.5.5.23 SUP028 : "The GetRepoBasedUpdateList method did not complete successfully." 2.5.5.24 SUP029 : "Firmware versions on server mat

complete]" When event is generated, message will have the following substitutions:• <Extent of completion> = "50"342

2.5.5.48 SUP0122 : "Firmware update completed successfully" 2.5.5.49 SUP0123 : "Firmware update completed successfully. The RAC is in t

• <component> = "Lifecycle Controller"• <version> = "1.1.0.726, X12"2.5.5.70 SUP0517 : "Unable to update the <

2.5.5.74 SUP0522 : "Unable to update the BIOS firmware because write protection is enabled." 2.5.5.75 SUP0525 : "Unable to verify the d

2.5.5.89 SUP0539 : "Update Packages missing in the repository." 2.5.5.90 SUP1901 : "Firmware update initializing." 2.5.5.91 SUP190

2.5.7.3 SWU8502 : "A <update/reinstall/rollback> request was submitted to the Lifecycle Controller on server <slot number>." Whe

2.5.7.11 SWU8516 : "Unable to update the iDRAC firmware on the server in slot <slot number>. Transfer is not successful. ErrorCode=0x<er

2.5.7.19 SWU8524 : "Unable to update the iDRAC on the server in slot <slot number> firmware: ErrorCode=0x<error no>." When event

2.1.18.25 PWR8511 : "Unable to set the CHASSIS_POWER_button_disable chassis power property." 2.1.18.26 PWR8512 : "CMC rebooted, because

• <error no> = ""2.5.7.31 SWU8536 : "Unable to update the LKVM firmware, because the Image file could not be accessed. ErrorCode=

2.5.7.36 SWU8542 : "Unable to update the Active CMC firmware. The Image file transfer process was not successful." 2.5.7.37 SWU8543 : "

automatically turned off in 5 seconds." 2.6 Category: Work Notes2.6.1 Subcategory= UEFI Event [MessageID prefix =UEFI]2.6.1.1 UEFI0050 : "T

33.0 SNMP Trap Event Notification Test Messages 3.1 Category: Audit3.1.1 Subcategory= BIOS Management [MessageID prefix =BIOS]3.1.1.1 BIOS102 : "

3.1.2.6 CMC8511 : "Unable to synchronize the data in the Extended Storage removable flash media in the primary and secondary CMCs." 3.1.2.7

• <slot id> = ""3.1.2.17 CMC8542 : "The CMC <slot id> was restarted because of a manual reset." When event is generate

3.1.2.25 CMC8553 : "An internal error occurred and a failover condition is detected." 3.1.2.26 CMC8554 : "An internal network error occ

• <slot number> = ""3.1.2.39 CMC8570 : "The server slot <slot number> is disabled for DVD drive mapping." When event i

• <Username> = "admin"3.1.3.4 DKM0004 : "DKM Error Code <Error_code_name>: <Error_code_msg> error." When event i

• <feature name> = ""3.1.6 Subcategory= Debug [MessageID prefix =FSD]3.1.6.1 FSD000 : "Debug authorized by customer; debugcaps:

AC." When event is generated, message will have the following substitutions:• <power value> = ""2.1.18.47 PWR8534 : "Unable

3.1.7.2 HWC8001 : "A device was added to the system at this location: <device location>. Additional Details: <details>." When ev

• <mode> = "USB-NIC"3.1.10.3 ISM0002 : "The OS to iDRAC Pass-through is disabled. The iDRAC Service Module is currently enabling

3.1.10.16 ISM0015 : "The iDRAC Service Module detected a change in the host name of the server operating system (OS)." 3.1.10.17 ISM0016 : &

3.1.12 Subcategory= Licensing [MessageID prefix =LIC]3.1.12.1 LIC000 : "The License Manager action succeeded." 3.1.12.2 LIC001 : "The

operation." 3.1.12.24 LIC201 : "License <entitlement ID> assigned to device <device name> expires in <number of days> days

3.1.12.33 LIC210 : "License <entitlement ID> deleted from device <device name> successfully." When event is generated, message w

3.1.13.6 LOG326 : "The Alert Log was cleared." 3.1.13.7 LOG327 : "An Alert Log backup was created." 3.1.13.8 LOG328 : "The Se

• <slot number> = ""3.1.17.2 PSU8502 : "The PSU in slot <slot number> detected 110 VAC input voltage and does not match cha

3.1.17.12 PSU8513 : "Unable to complete the PSU slot <number> firmware update. Error=0x<error number>." When event is generated,

3.1.18 Subcategory= Power Usage [MessageID prefix =PWR]3.1.18.1 PWR2250 : "Unable to turn on the server because the chassis infrastructure not r

2.1.18.59 PWR8546 : "Chassis shutdown already in progress." 2.1.18.60 PWR8547 : "Chassis is already powered off." 2.1.18.61 PWR854

3.1.18.12 PWR2262 : "The Intel Management Engine has reported an internal system error." 3.1.18.13 PWR2263 : "User ignored Power Supply

3.1.18.23 PWR8509 : "Unable to change the server power priority because Server Based Power Management mode is enabled." 3.1.18.24 PWR8510 :

3.1.18.25 PWR8511 : "Unable to set the CHASSIS_POWER_button_disable chassis power property." 3.1.18.26 PWR8512 : "CMC rebooted, because

AC." When event is generated, message will have the following substitutions:• <power value> = ""3.1.18.47 PWR8534 : "Unable

3.1.18.59 PWR8546 : "Chassis shutdown already in progress." 3.1.18.60 PWR8547 : "Chassis is already powered off." 3.1.18.61 PWR854

• <IOM slot name> = ""3.1.18.71 PWR8561 : "Unable to power on server <server number> because of iDRAC communication issue.&

3.1.18.79 PWR8569 : "Unable to power cycle the server <slot number> because the server is off." When event is generated, message will

• <slot number> = ""3.1.18.88 PWR8578 : "Chassis Management Controller is unable to turn on the iDRAC on server-<slot number&g

3.1.18.96 PWR8586 : "Chassis Management Controller is unable to turn on server-<slot number> because it is not supported in the VRTX chassi

• <slot id> = ""3.1.18.106 PWR8596 : "Chassis Management Controller is unable to turn on server-<slot number> because PSU r

• <IOM slot name> = ""2.1.18.71 PWR8561 : "Unable to power on server <server number> because of iDRAC communication issue.&

3.1.18.113 PWR8666 : "iKVM power cycle initiated." 3.1.18.114 PWR8667 : "Resetting iKVM to default settings." 3.1.18.115 PWR8668 :

3.1.19 Subcategory= RAC Event [MessageID prefix =RAC]3.1.19.1 RAC0100 : "The Smart Card is removed. Further communication is not possible."

partition." 3.1.19.30 RAC0138 : "A valid certificate is not loaded." 3.1.19.31 RAC0140 : "Firmware update has failed." 3.1.19

characters." 3.1.19.65 RAC0222 : "The Destination E-mail Address is invalid." 3.1.19.66 RAC0223 : "Enter an alphanumeric value or

3.1.19.81 RAC0242 : "The selected partition does not exist." 3.1.19.82 RAC0243 : "Partition failed: A partitioning conflict has occurre

remotely through Web GUI, Remote Racadm, Ssh, and Telnet. Local Racadm and serial interface will continue to work." 3.1.19.110 RAC0273 : "iD

Authority (CA) certificate must be uploaded. The CA certificate is used to verify the directory server SSL certificate." 3.1.19.130 RAC0294 : &qu

3.1.19.144 RAC0701 : "Requested system powerup." 3.1.19.145 RAC0702 : "Requested system powercycle." 3.1.19.146 RAC0703 : "Re

3.1.19.164 RAC0722 : "Failed to program the Chassis assigned MAC address for the NIC.Integrated.<NDC slot number >." When event is gen

3.1.20.6 RDU8508 : "CMC<slot number>: cannot failover since the other CMC is non-functional." When event is generated, message will ha

2.1.18.79 PWR8569 : "Unable to power cycle the server <slot number> because the server is off." When event is generated, message will

• <slot number> = ""3.1.20.15 RDU8517 : "CMC<slot number>: no action allowed while firmware update is in progress" Whe

3.1.21 Subcategory= Software Config [MessageID prefix =SWC]3.1.21.1 SWC1916 : "Network Time Protocol server configuration has changed." 3.1

• <profile name> = ""3.1.21.14 SWC8508 : "Unable to capture Profile from server in slot <slot number>" When event is g

• <user name> = ""3.1.21.24 SWC8518 : "Unable to modify password of User <user name>: <error code>-<error message&

3.1.21.32 SWC8526 : "Unable to delete Chassis Group member <member id> (<DNS or IP address of member>)" When event is generated,

3.1.21.44 SWC8538 : "Unable to delete key for slot <slot number> of service account, due to problem saving key file." When event is ge

• <slot number> = ""3.1.21.53 SWC8604 : "Quick Deploy Profile: Server <server number> does not support configuration using

• <profile name> = ""3.1.21.61 SWC8612 : "Unable to fully extract boot device information from profile: <profile name>.&quo

• <slot number> = ""398

3.1.22.2 SWU8557 : "Invalid firmware: The uploaded firmware image does not contain a verification signature." 3.1.22.3 SWU8558 : "Inval

2.2.6 Subcategory= Auto-Discovery [MessageID prefix =DIS]... 802.2.7 Subcategory= Fan Event [MessageI

• <slot number> = ""2.1.18.88 PWR8578 : "Chassis Management Controller is unable to turn on the iDRAC on server-<slot number&g

<errors>" When event is generated, message will have the following substitutions:• <number of servers> = ""3.1.24 Subcateg

3.1.25.4 USR0008 : "The Default Login Warning feature is disabled." 3.1.25.5 USR0013 : "Insufficient user privileges to perform operati

• <interface name> = "GUI"3.1.25.19 USR0033 : "Login for <username> from <IP address> using <interface name> wa

3.1.25.25 USR0152 : "Unable to connect the remote VNC session, beacause an incorrect VNC password was entered from the IP <IP address>.&quo

3.1.25.30 USR0173 : "The Front Panel USB port switched automatically from iDRAC to operating system." 3.1.25.31 USR0174 : "The Front Pa

• <process ID> = ""3.1.25.43 USR8502 : "Successfully closed Session: pid=<process ID> sid=<session ID>" When eve

3.1.25.52 USR8511 : "Login was successful <description> from <address> (username=<username>, type=<session type>, sid=<

3.2.1 Subcategory= Backup/Restore [MessageID prefix =BAR]3.2.1.1 BAR001 : "Export System Profile requested." 3.2.1.2 BAR002 : "Validat

Host System." 3.2.1.29 BAR029 : "Restoring Integrated Remote Access Controller firmware." 3.2.1.30 BAR030 : "Import System Profile

• <device name> = "PERC H310 Mini"3.2.1.51 BAR051 : "Performing Component Configuration Restore for Device : <device name>&

2.1.18.96 PWR8586 : "Chassis Management Controller is unable to turn on server-<slot number> because it is not supported in the VRTX chassi

3.2.1.58 BAR058 : "Validating NFS destination access." 3.2.1.59 BAR059 : "Validating CIFS destination access." 3.2.1.60 BAR060 : &

information." 3.2.1.84 BAR084 : "Host System Service Tag does not match the Backup file Service Tag." 3.2.1.85 BAR085 : "Unable to

processing." 3.2.1.111 BAR111 : "Server Profile operation timed out." 3.2.1.112 BAR112 : "The system identifier in the Server Prof

3.2.2.5 BIOS005 : "Mismatch in AttributeName and AttributeValue count" 3.2.2.6 BIOS006 : "Configuration job already created, cannot set

3.2.2.17 BIOS017 : "Unable to delete vFlash pending one-time boot configuration" 3.2.2.18 BIOS018 : "Invalid BIOS Password." 3.2.2

3.2.2.26 BIOS028 : "Unable to change the BIOS password using plain text because the password is currently being configured using a hash." 3.

• <slot number> = ""3.2.4 Subcategory= Chassis Management Controller [MessageID prefix =CMC]3.2.4.1 CMC001 : "The command was su

3.2.5 Subcategory= Cert Mgmt [MessageID prefix =DH]3.2.5.1 DH001 : "Resource needed to perform the operation is unavailable." 3.2.5.2 DH002

• <new IP address> = "Unknown"• <old IP address> = "Unknown"3.2.6.9 DIS009 : "Notification of iDRAC IP address ch

3.2.6.11 DIS011 : "Auto Discovery client using customer signed client certificate." 3.2.6.12 DIS012 : "Auto Discovery client using fact

• <slot id> = ""2.1.18.106 PWR8596 : "Chassis Management Controller is unable to turn on server-<slot number> because PSU r

not available." 3.2.7.4 FAN903 : "Cannot enable the Enhanced Cooling Mode because an unsupported fan is inserted in the Chassis." 3.2.7

3.2.8.5 FC005 : "The number of AttributeName array elements does not match the AttributeValue array element count." 3.2.8.6 FC006 : "Co

3.2.8.17 FC017 : "Unable to perform the operation due to an internal error in iDRAC." 3.2.9 Subcategory= Hardware Config [MessageID prefix

3.2.10.4 IOID004 : "Virtual Address Persistence Policy setting for Non-Auxiliary powered devices is changed to <restart type>." When e

• <port> = " 1"3.2.10.12 IOID115 : "Unable to configure the target settings properties of the NIC <controller> Port <por

3.2.10.13 IOID116 : "Applying I/O Identity settings based on current persistence policy settings." 3.2.10.14 IOID117 : "The operation t

• <device name> = ""3.2.11.16 IOV102 : "A PCIe adapter <device name> is removed from <slot type> <slot number>.

3.2.11.25 IOV123 : "<"PCIE Slot" or "PERC VA"> <slot number or VA number> is unassigned/unmapped from extended se

• <slot number> = ""3.2.12 Subcategory= DRAC IP Address [MessageID prefix =IPA]3.2.12.1 IPA0100 : "The iDRAC IP Address changed

3.2.13.14 JCP014 : "Maximum jobs per queue exceeded." 3.2.13.15 JCP015 : "A running job cannot be deleted." 3.2.13.16 JCP016 : &qu

2.1.18.113 PWR8666 : "iKVM power cycle initiated." 2.1.18.114 PWR8667 : "Resetting iKVM to default settings." 2.1.18.115 PWR8668 :

3.2.13.25 JCP024 : "Lifecycle Controller is in use. This job starts when Lifecycle Controller is available." 3.2.13.26 JCP025 : "Lifecy

• <parameter> = "parameter"3.2.14.17 LC017 : "Invalid value for the parameter, <parameter>." When event is generated,

3.2.14.18 LC018 : "Server certificate successfully modified. iDRAC will now restart and be unavailable during restart." 3.2.14.19 LC019 : &q

running." 3.2.14.44 LC045 : "An instance of CreateConfigJob is already running." 3.2.14.45 LC046 : "An instance of DownloadServerP

3.2.14.59 LC060 : "Lifecycle controller is currently not ready to take provisioning requests" 3.2.14.60 LC061 : "Lifecycle controller i

3.2.14.65 LC066 : "The Export Certificate operation is currently running." 3.2.14.66 LC067 : "Successfully exported SSL Certificate.&qu

• <parameters> = "parameters"3.2.15.5 LIC904 : "Could not connect to network share." 3.2.15.6 LIC905 : "The LicenseName

3.2.16.16 LOG504 : "Chassis Log Export was successful." 3.2.16.17 LOG505 : "Cannot access network share." 3.2.16.18 LOG506 : "

3.2.17.5 NIC005 : "Mismatch in AttributeName and AttributeValue count" 3.2.17.6 NIC006 : "A configuration job already exists, Cannot se

3.2.17.17 NIC017 : "Unable to delete vFlash pending one-time boot configuration" 3.2.17.18 NIC018 : "Invalid BIOS password." 3.2.1

2.1.19 Subcategory= RAC Event [MessageID prefix =RAC]2.1.19.1 RAC0100 : "The Smart Card is removed. Further communication is not possible."

system." 3.2.18.21 OSD21 : "Unable to boot to ISO image." 3.2.18.22 OSD22 : "Unable to detach ISO image from the host." 3.2.1

and is in progress." 3.2.18.63 OSD063 : "The process of installing an operating system or hypervisor is successfully completed." 3.2.18

• <device name> = "device name"3.2.20.5 PR5 : "The configuration values stored for the previous device could not be applied to de

3.2.20.16 PR16 : "Some of the configuration values could not be applied to device: <device name>" When event is generated, message wil

• <job ID> = "JID_432156780987"3.2.20.35 PR35 : "Power Supply slot <PS slot number> firmware update will be performed durin

3.2.22.5 RAC005 : "Mismatch in AttributeName and AttributeValue count." 3.2.22.6 RAC006 : "AttributeValue cannot be changed for ReadOnl

3.2.22.16 RAC016 : "Invalid AttributeName." 3.2.22.17 RAC017 : "Job created to apply the attribute value." 3.2.22.18 RAC018 : &quo

• <parameter> = "parameter"3.2.22.40 RAC040 : "Missing parameters <parameters>." When event is generated, message will

3.2.22.57 RAC057 : "Unable to set Privacy Protocol to an enabled state because the Authentication Protocol attribute is set to None for the user

3.2.22.64 RAC064 : "iDRAC was successfully reset." 3.2.22.65 RAC065 : "iDRAC reset operation was not successful." 3.2.22.66 RAC066

partition." 2.1.19.30 RAC0138 : "A valid certificate is not loaded." 2.1.19.31 RAC0140 : "Firmware update has failed." 2.1.19

job queue." When event is generated, message will have the following substitutions:• <import or export job ID> = "123456789"3.2.2

3.2.22.101 RAC0661 : "Storage configuration operation - #(operation) is pending on the selected #{devicetype} : #{devicename}." 3.2.22.102 R

invoked by the <user name>." When event is generated, message will have the following substitutions:• <user name> = "root"3

3.2.22.134 RAC939 : "Unable to start the system configuration profile export or import operation." 3.2.22.135 RAC940 : "Unable to start

in recovery state," 3.2.22.158 RAC963 : "Unable to retrieve the status of Lifecycle Controller." 3.2.22.159 RAC964 : "Unable to pe

(PKCS12) file." 3.2.22.179 RAC985 : "Unable to configure the cfgServerBootOnce object." 3.2.22.180 RAC986 : "The "vmkey"

3.2.22.188 RAC994 : "Unable to run the "jobqueue delete --all" command." 3.2.22.189 RAC995 : "Unable to retrieve the hardware

3.2.22.202 RAC1008 : "The Active Directory object DCLookupByUserDomain cannot be disabled." 3.2.22.203 RAC1009 : "The Active Directory

• <Job ID or ALL> = "123456789"3.2.22.225 RAC1033 : "Unable to retrieve the server component software inventory." 3.2.22.226

3.2.22.235 RAC1044 : "The Automatic Update (autoupdate) feature is not enabled." 3.2.22.236 RAC1045 : "Specifying ftp.dell.com as the c

characters." 2.1.19.65 RAC0222 : "The Destination E-mail Address is invalid." 2.1.19.66 RAC0223 : "Enter an alphanumeric value or

3.2.22.243 RAC1052 : "The Automatic Backup (autobackup) feature is not enabled." 3.2.22.244 RAC1053 : "Unable to view the Automatic Bac

3.2.22.258 RAC1068 : "Unable to set minimum non critical threshold value of <System Board Inlet Temp>, because the value entered is greater

3.2.22.264 RAC1109 : "Unable to run the command, because an incorrect Share type is entered." 3.2.22.265 RAC1110 : "Unable to run the c

3.2.22.270 RAC1115 : "Unable to run the command, because of insufficient user privileges." 3.2.22.271 RAC1116 : "Unable to run the comm

to a remote share." 3.2.22.292 RAC1141 : "The iDRAC firmware rollback operation was initiated." 3.2.22.293 RAC1142 : "Unable to st

3.2.22.296 RAC1145 : "The entered log type is invalid." 3.2.22.297 RAC1146 : "Unable to set the SNMPv3 username because SNMPv3 is not e

3.2.22.313 RAC1164 : "A remote diagnostics operation is currently running and not completed." 3.2.22.314 RAC1165 : "Unable to configure

3.2.22.316 RAC1168 : "The RACADM "getconfig" command will be deprecated in a future version of iDRAC firmware." 3.2.22.317 RAC1169

• <parameter> = "Param1"468

3.2.23.5 RED074 : "A required parameter is not present." 3.2.23.6 RED075 : "An Automatic Backup schedule already exists." 3.2.24

2.1.19.81 RAC0242 : "The selected partition does not exist." 2.1.19.82 RAC0243 : "Partition failed: A partitioning conflict has occurre

job for the device already exists." 3.2.26.19 STOR024 : "Unable to create a configuration job because a configuration job for the device alr

• <attribute name> = "DiskCachePolicy"3.2.26.35 STOR042 : "Unsupported value for AttributeName <attribute name>" When

3.2.26.41 STOR048 : "Controller is not Dell Key Management capable." 3.2.26.42 STOR049 : "Controller is in Local Key Management mode.&q

Lifecycle Controller version on the server does not have the necessary capabilities." 3.2.26.62 STOR069 : "Unable to run the <method name

3.2.26.65 STOR072 : "iDRAC Service Module (ISM) is either not present or not running on the server OS." 3.2.26.66 STOR073 : "The iDRAC

present on the controller. Delete the preserved cache and retry the operation." 3.2.26.83 STOR0701 : "Storage objects are unavailable in the

3.2.26.85 STOR034 : "Invalid parameter value for RebootJobType." 3.2.27 Subcategory= Software Config [MessageID prefix =SWC]3.2.27.1 SWC000

Controller GUI." 3.2.27.23 SWC0028 : "The backup Server Profile operation did not successfully complete." 3.2.27.24 SWC0029 : "Una

share folder." 3.2.27.67 SWC0072 : "Unable to export the Tech Support Report to destination folder." 3.2.27.68 SWC0073 : "Unable t

3.2.27.72 SWC0077 : "Unable to initiate the Repurpose or Retire System operation." 3.2.27.73 SWC0101 : "Unable to read available log re

remotely through Web GUI, Remote Racadm, Ssh, and Telnet. Local Racadm and serial interface will continue to work." 2.1.19.110 RAC0273 : "iD

configured before a CSR can be generated." 3.2.27.101 SWC0129 : "Unable to send test email. Please make sure that your email alerts\nhave be

3.2.27.112 SWC0140 : "RAC reset operation initiated successfully. It may take up to a minute \nfor the RAC to come back online again." 3.2.2

know Remote File Share is ENABLED or DISABLED." 3.2.27.148 SWC0216 : "The -c option requires -l to also be specifed." 3.2.27.149 SWC021

AutoConfig is enabled." 3.2.27.172 SWC0240 : "The IPv6 DNS Server IP address is not allowed to be configured if IPv6 DNS Server DHCP (cfgIPv

3.2.27.184 SWC0252 : "No options were specified. The subcommand requires options to be used." 3.2.27.185 SWC0253 : "Unable to allocate

• <index> = "1"3.2.27.213 SWC0281 : "The specified object is READ ONLY and cannot be modified." 3.2.27.214 SWC0282 : "T

• <index number> = "1"486

3.2.27.225 SWC0293 : "The specified object is not recognized by iDRAC." 3.2.27.226 SWC0294 : "Invalid group name specified." 3.2.2

in read-only mode." 3.2.27.261 SWC0722 : "Error occurred while resetting to defaults. The reset command was not accepted." 3.2.27.262 S

• <user name> = "UserName"3.2.27.277 SWC1925 : "The iDRAC Quick Sync access feature is set to the Disabled mode." 3.2.27.278

Authority (CA) certificate must be uploaded. The CA certificate is used to verify the directory server SSL certificate." 2.1.19.130 RAC0294 : &qu

3.2.28 Subcategory= System Info [MessageID prefix =SYS]3.2.28.1 SYS001 : "The operation was successful." 3.2.28.2 SYS002 : "Unable to

3.2.28.11 SYS011 : "Pending configuration values are already committed, unable to perform another set operation." 3.2.28.12 SYS012 : "U

3.2.28.27 SYS030 : "Collecting component configuration information." 3.2.28.28 SYS031 : "Updating component configuration." 3.2.28

• <line> = " linenumber"3.2.28.46 SYS050 : "The system configuration XML file for import configuration is not compliant with sche

3.2.28.61 SYS065 : "Input file for import configuration operation cannot be found or opened." 3.2.28.62 SYS066 : "No changes detected f

imported to the system." 3.2.28.80 SYS088 : "Estimated time for applying configuration changes is <configuration time> seconds."

• <job ID> = "JID_123456789098"3.2.28.97 SYS152 : "Erase operations for some System Erase tasks did not complete successfully.&qu

3.2.28.101 SYS156 : "Erase operations for System Erase tasks successfully completed." 3.2.28.102 SYS157 : "Unable to successfully compl

3.2.29.5 TST104 : "SNMP traps not configured." 3.2.29.6 TST105 : "Invalid parameter value for <parameter name>." When event

3.2.30.14 UEFI0073 : "Unable to boot <Boot Option name> because of the Secure Boot policy." When event is generated, message will have

2.3.13 Subcategory= Software Change [MessageID prefix =SWU]... 2162.3.14 Subcategory= Temperature [MessageID

2.1.19.144 RAC0701 : "Requested system powerup." 2.1.19.145 RAC0702 : "Requested system powercycle." 2.1.19.146 RAC0703 : "Re

• <slot number> = "B2"3.2.30.24 UEFI0092 : "The number of DIMM ranks has exceeded the maximum allowed ranks per channel limit.&qu

3.2.30.35 UEFI0105 : "Unable to enable the Cluster on Die (COD) feature because of an unsupported memory configuration." 3.2.30.36 UEFI0113

• <parameter name> = "parameter name"3.2.31.4 USR103 : "Missing parameters <parameter names>." When event is generated

3.2.32.5 VF005 : "Empty partition creation successful" 3.2.32.6 VF006 : "Empty partition creation failed" 3.2.32.7 VF007 : "I

could not be initialized." 3.2.33.13 VFL0713 : "One or more partitions are currently attached; the SD card could not be initialized." 3

3.3.1.4 BAT1003 : "The battery on <controller name> learn cycle has completed." When event is generated, message will have the followi

• <Controller name> = "RAID Controller in Slot 5"3.3.1.13 BAT1012 : "The <Controller name> battery temperature is above nor

3.3.1.22 BAT1021 : "The charge level for the battery on <controller name> is below the normal threshold." When event is generated, mes

3.3.1.31 BAT1030 : "The <Controller name> battery charge level is normal." When event is generated, message will have the following su

3.3.3 Subcategory= Storage Contr [MessageID prefix =CTL]3.3.3.1 CTL1 : "Controller event log: <message>" When event is generated, mes

2.1.19.164 RAC0722 : "Failed to program the Chassis assigned MAC address for the NIC.Integrated.<NDC slot number >." When event is gen

• <Controller name> = "RAID Controller in Slot 5"3.3.3.11 CTL11 : "Configuration on <controller name> was reset." When

• <Controller name> = "RAID Controller in Slot 5"3.3.3.20 CTL21 : "Abort CC on Error and Load Balance has changed for <Control

3.3.3.29 CTL30 : "The Check Consistency rate has changed for <Controller name>." When event is generated, message will have the follow

• <Controller name> = "RAID Controller in Slot 5"3.3.3.39 CTL40 : "Multi-bit ECC error on <Controller name> DIMM." Whe

3.3.3.48 CTL49 : "The NVRAM has corrupted data on <Controller name>." When event is generated, message will have the following substit

3.3.3.57 CTL58 : "<Controller name> SAS SMP communications error <args>" When event is generated, message will have the followin

• <Controller name> = " RAID Controller in Slot 5"3.3.3.65 CTL66 : "Attempted to import Unsupported Virtual Disk type RAID<arg

• <controller name> = "RAID Controller in Slot 5"3.3.3.74 CTL75 : "Preserved cache discarded on <controller name>." Wh

• <controller name> = "RAID Controller in Slot 5"3.3.3.83 CTL84 : "<controller name> is running an unsupported firmware ver

• <controller name> = "RAID Controller in Slot 6"3.3.3.92 CTL93 : "<controller name> has been successfully changed to opera

2.1.20.6 RDU8508 : "CMC<slot number>: cannot failover since the other CMC is non-functional." When event is generated, message will ha

• <controller name> = "RAID Controller in Slot 5"3.3.3.101 CTL102 : "The <controller name> is enabled." When event is

• <controller name> = "Controller 1 (PERC H800 Adapter)"3.3.3.108 CTL206 : "Abort Check Consistency on Error and Auto Copyback on

• <controller name> = "Controller 1 (PERC H800 Adapter)"3.3.3.117 CTL215 : "Redundant path disconnected on <Controller Name>

3.3.4.6 DIAG0146 : "Hard Drive <Drive Location> - S/N <Serial Number>, self test log contains previous error(s)." When event is

• <80000000000000??> = "800000000018"• <Error Reason> = ""3.3.4.14 DIAG0155 : "Hard Drive - Not installed."

3.3.4.20 DIAG8160 : "PERC Battery <PERC Controller Location> - incorrect status = <80000000000000??>\n<Error Reason>." Whe

3.3.5.8 ENC8 : "The <Enclosure Name> alarm was disabled." When event is generated, message will have the following substitutions:• <

• <Enclosure Name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"3.3.5.17 ENC17 : "An Enclosure Management Module (E

• <enclosure name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"3.3.5.26 ENC27 : "SAS or SATA mixing of physical di

• <enclosure name> = "Enclosure 0:0 on Controller 1 at Connector 0"3.3.6 Subcategory= Fan Event [MessageID prefix =FAN]3.3.6.1 FAN100

• <slot number> = ""2.1.20.15 RDU8517 : "CMC<slot number>: no action allowed while firmware update is in progress" Whe

3.3.7.6 FLDC1007 : "The cache device <physical disk Name> with WWN = <World Wide Name> and path = <device pathname> is removed.

3.3.7.14 FLDC1016 : "A valid permanent license is installed for Fluid Cache." 3.3.7.15 FLDC1017 : "A license has been installed for Flu

3.3.7.22 FLDC1024 : "Caching was enabled in write-back mode, but it is currently operating in write-through mode." 3.3.7.23 FLDC1025 : "

3.3.7.35 FLDC1037 : "Configuration changes are disabled, because Fluid cache is running on an expired or invalid license." 3.3.7.36 FLDC1038

• <PD Name> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"3.3.8.9 PDR9 : "Initialization has started on &l

• <PD Name> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"3.3.8.19 PDR19 : "SMART FPT exceeded for <PD

• <PD Name> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"3.3.8.29 PDR29 : "Rebuild on <PD Name> com

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"3.3.8.39 PDR39 : "A blink operation has in

• <PD Name> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"3.3.8.49 PDR50 : "Insufficient space on the glob

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"3.3.8.59 PDR60 : "Error occurred on <ph

2.1.21 Subcategory= Software Config [MessageID prefix =SWC]2.1.21.1 SWC1916 : "Network Time Protocol server configuration has changed." 2.1

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"3.3.8.69 PDR70 : "Copyback started from &l

3.3.8.78 PDR79 : "A user terminated Copyback from <physical disk> to <physical disk>." When event is generated, message will hav

3.3.8.87 PDR93 : "Microcode update on <physical disk> has completed." When event is generated, message will have the following substit

3.3.8.97 PDR104 : "The <PCIe solid state device name> has turned off because the critical temperature threshold is exceeded." When eve

• <PCIe solid state device name> = "PCIe Solid-State Drive in Slot 9 in Bay 1"3.3.8.106 PDR114 : "The <PCIe solid state device

• <physical disk name> = "Physical Disk 1:0:5 on Controller 0 at Connector 1"3.3.8.115 PDR211 : "<physical disk name> has e

3.3.9.4 PSU1003 : "<PSU Sensor Name> is switched OFF." When event is generated, message will have the following substitutions:• <PS

3.3.10 Subcategory= RAC Event [MessageID prefix =RAC]3.3.10.1 RAC0500 : "There are no batteries to be displayed." 3.3.10.2 RAC0501 : "

3.3.11.4 SSD1004 : "Exported the <PCIe SSD name> log file." When event is generated, message will have the following substitutions:• &

• <args> = "CDB:xyz, Sense:abc"3.3.12.3 STOR3 : "CEM Storage Management has lost communication with the <Controller Name>.&

• <profile name> = ""2.1.21.14 SWC8508 : "Unable to capture Profile from server in slot <slot number>" When event is g

3.3.12.6 STOR6 : "CEM Storage Management detected inventory change(s) after host re-boot." 3.3.12.7 STOR7 : "The storage management ins

3.3.12.22 STOR0101 : "No RAID controller is displayed." 3.3.12.23 STOR0102 : "No batteries are displayed." 3.3.12.24 STOR0103 : &q

3.3.12.36 STOR0203 : "The current operating system kernel version and the non-RAID SCSI driver version are older than the minimum required versio

3.3.12.46 STOR0501 : "Unable to configure RAID." 3.3.12.47 STOR0502 : "Unable to launch RAID Configuration wizard." 3.3.12.48 STOR

3.3.14.3 TMP7 : "<Temp Sensor Name> has failed." When event is generated, message will have the following substitutions:• <Temp Sen

• <VD Name> = "Virtual Disk 0 on Integrated RAID Controller 1"3.3.15.4 VDR4 : "<virtual disk> was created." When event

• <VD Name> = "Virtual Disk 0 on Integrated RAID Controller 1"3.3.15.14 VDR14 : "The consistency check on <virtual disk> wa

• <virtual disk> = "Virtual Disk 0 on Integrated RAID Controller 1"3.3.15.24 VDR24 : "Reconfiguration of <virtual disk> has

• <virtual disk> = "Virtual Disk 0 on Integrated RAID Controller 1"3.3.15.35 VDR35 : "Background initialization has completed for

3.3.15.44 VDR44 : "<VD Name> disk cache policy has changed." When event is generated, message will have the following substitutions:•

• <user name> = ""2.1.21.24 SWC8518 : "Unable to modify password of User <user name>: <error code>-<error message&

3.3.15.53 VDR53 : "The consistency check logging of inconsistent parity data is disabled for <virtual disk>." When event is generated,

3.3.15.62 VDR93 : "<VD Name> bad block medium error is cleared." When event is generated, message will have the following substitution

• <virtual disk names> = "Virtual Disk 1 (Virtual Disk 1) on Controller 0 (PERC 5/i Integrated)"3.3.15.71 VDR101 : "Virtual Adapt

• <virtual disk name> = "Virtual Disk 1 (Virtual Disk 1) on Controller 0 (PERC 5/i Integrated)"3.3.15.79 VDR109 : "Successfully d

3.4.1.4 AMP0303 : "The system board <name> current is greater than the upper critical threshold." When event is generated, message wil

3.4.1.13 AMP0312 : "System level current is less than the lower warning threshold." 3.4.1.14 AMP0313 : "System level current is less th

• <current> = " 100.000"3.4.1.29 AMP404 : "The <sensor name> sensor detected an error with a value of <current> A.&qu

• <day month date hh:mm:ss yyyy> = "Tue Jan 08 10:56:54 2013"3.4.2.17 ASR201 : "The watchdog timer restarted the system at <da

3.4.3.12 BAT0011 : "The storage battery for disk drive bay <bay> is operating normally." When event is generated, message will have th

3.4.3.21 BAT0030 : "The system board battery is reading low." 3.4.3.22 BAT0031 : "The system board battery status is unknown." 3.4

2.1.21.32 SWC8526 : "Unable to delete Chassis Group member <member id> (<DNS or IP address of member>)" When event is generated,

• <cable name> = "PERC SAS B0"• <bay ID> = "2"• <cable name> = "PCIe C"3.4.5 Subcategory= Chassis Man

• <slot number> = ""3.4.5.10 CMC8520 : "The FRU on server <slot number> is not functioning." When event is generated,

3.4.5.19 CMC8534 : "Unable to turn on the server <slot number> because the power requirement request exceeds the power cap value." Whe

3.4.6.9 CPU0008 : "CPU <number> is disabled." When event is generated, message will have the following substitutions:• <number>

• <number> = "1"3.4.6.19 CPU0701 : "CPU <number> protocol error detected." When event is generated, message will have

3.4.6.29 CPU0806 : "CPU <number> voltage regulator module is incorrectly configure." When event is generated, message will have the fo

• <Cpu Number> = "0"3.4.8.4 DIAG0114 : "Cache integrity test discrepancy <Error Reason>" When event is generated, mess

3.4.8.16 DIAG0213 : "System board - CMOS battery failure detected." 3.4.8.17 DIAG0221 : "System board - Interval timer not functional.&

• <Sensor Name> = "CPU1"• <Degrees> = "78"3.4.8.30 DIAG0315 : "Sensor: The (<Sensor Name>) reading <Degr

3.4.8.46 DIAG 0414 : "Cables - <Inverter Name> not detected." When event is generated, message will have the following substitutions:•

2.1.21.44 SWC8538 : "Unable to delete key for slot <slot number> of service account, due to problem saving key file." When event is ge

• <Name> = "CPU Thermistor"• <Decimal> = "7"• <Decimal> = "8"3.4.8.54 DIAG8003 : "Fan - Unable to

• <Decimal> = "1"3.4.8.64 DIAG8013 : "LCD <Name> doesnt support test commands." When event is generated, message will

3.4.8.74 DIAG8171 : "PCIe - PCI device in physical Slot <decimal>, PciTag <hex>, is present but not responding" When event is ge

3.4.9 Subcategory= Dell Key Mngr [MessageID prefix =DKM]3.4.9.1 DKM1000 : "A network problem detected. Cannot contact key management server.&quo

3.4.10.8 FAN0007 : "Fan <number> was inserted." When event is generated, message will have the following substitutions:• <number>

• <fan name> = "Blower"3.4.10.18 FAN0017 : "<fan name> RPM is within normal operating range." When event is generated,

3.4.10.26 FAN0026 : "The <sensor name> sensor detected an error with a value of <fan speed> RPM." When event is generated, messa

• <name> = "KVM"3.4.12.4 HWC1003 : "The <name> is enabled." When event is generated, message will have the following s

3.4.12.19 HWC1200 : "The sled <sled name> is inserted in slot <slot number>." When event is generated, message will have the fol

• <name> = "DRAC"3.4.12.28 HWC2007 : "The <name> is installed correctly." When event is generated, message will have t

• <slot number> = ""2.1.21.53 SWC8604 : "Quick Deploy Profile: Server <server number> does not support configuration using

• <name> = "IOM"3.4.12.38 HWC3001 : "The <name> is inserted." When event is generated, message will have the following

3.4.12.49 HWC4011 : "Hardware unsuccessfully updated for mezzanine card <number>." When event is generated, message will have the foll

3.4.12.59 HWC5002 : "A fabric mismatch detected on <name>." When event is generated, message will have the following substitutions:• &

• <number> = "A1"3.4.12.69 HWC5032 : "A fabric mismatch detected on IO module <number>." When event is generated, mess

• <name> = "LCD"3.4.12.79 HWC6004 : "Cannot communicate with <name> controller." When event is generated, message will

• <number> = "1"3.4.12.88 HWC8004 : "The SD card device sensor has failed. SD card location: <location>, SD card device typ

• <state> = " NULL"3.4.12.94 HWC8501 : "Unable to complete the operation because of an issue with the I/O panel cable." 3.4.

3.4.13.5 IOV108 : "Power fault detected on PCIE adapter <device name> in <slot type> <slot number>." When event is generat

• <slot number> = ""3.4.13.17 IOV2008 : "The Chassis Management Controller (CMC) is unable to communicate with the PCIe subsystem

• <log type> = "Command"3.4.15.3 LOG323 : "The log size is near maximum capacity. Log type: <log type>." When event is

2.4.39 Subcategory= vFlash Media [MessageID prefix =VF]...3212.4.40 Subcategory= vFlash Event [Mes

• <profile name> = ""2.1.21.61 SWC8612 : "Unable to fully extract boot device information from profile: <profile name>.&quo

3.4.16.6 MEM0005 : "Persistent correctable memory error limit reached for a memory device at location(s) <location>." When event is ge

3.4.16.15 MEM0022 : "Memory device at location <location> is absent." When event is generated, message will have the following substit

• <location> = "DIMM1"3.4.16.25 MEM1003 : "Memory device at location <location> failed to transition to in test." When

• <location> = "DIMM1"3.4.16.35 MEM1013 : "Memory device at location <location> is in a full state." When event is gen

• <location> = "DIMM1"3.4.16.46 MEM1206 : "Memory mirror redundancy is degraded. Check memory device at location <location>

3.4.16.57 MEM6004 : "Memory device status is critical. Memory device location: <location>, Possible memory module event cause: <cause>

• <QPI link number> = "1"3.4.16.68 MEM9005 : "Intel SMI 2 Memory interconnect <link number> has degraded." When event

3.4.17.3 NIC500 : "The requested object is not allowed to be configured if DHCP \nis enabled." 3.4.17.4 NIC501 : "The requested object

<device> function <func>." When event is generated, message will have the following substitutions:• <bus> = "1"• <

• <bus> = "1"• <device> = "1"• <func> = "1"3.4.19.10 PCI1318 : "A fatal error was detected on a c

• <slot number> = ""61

3.4.19.16 PCI1344 : "An I/O channel check error was detected." 3.4.19.17 PCI1346 : "A software error was detected on a component at slo

• <device> = "1"• <func> = "1"3.4.19.26 PCI2001 : "The component at bus <bus> device <device> functio

3.4.19.34 PCI3005 : "Device option ROM on mezzanine card <number> was successfully updated." When event is generated, message will hav

• <number> = "1"3.4.19.44 PCI3015 : "The component at slot <number> recovered from a non-fatal PCIe error." When event

• <slot number> = ""3.4.19.54 PCI5008 : "The Chassis Management Controller (CMC) is unable to communicate with the PCIe switch bo

• <bay> = "0"3.4.20.8 PDR1007 : "Rebuild is in progress for drive <number> in disk drive bay <bay>." When event

• <number> = "1"• <bay> = "0"3.4.20.16 PDR1023 : "Rebuild completed for drive <number> in disk drive bay &l

• <number> = "1"3.4.20.25 PDR1106 : "Drive <number> is in the failed array." When event is generated, message will hav

• <number> = "1"3.4.21 Subcategory= System Performance Event [MessageID prefix =PFM]3.4.21.1 PFM0001 : "The value of <sensor

3.4.22 Subcategory= BIOS POST [MessageID prefix =PST]3.4.22.1 PST0000 : "Unrecognized Post Code." 3.4.22.2 PST0001 : "System Power On.

2.1.22.2 SWU8557 : "Invalid firmware: The uploaded firmware image does not contain a verification signature." 2.1.22.3 SWU8558 : "Inval

• <number> = "1"3.4.23.2 PSU0001 : "Power supply <number> failed." When event is generated, message will have the foll

3.4.23.11 PSU0022 : "Power supply <number> is correctly configured." When event is generated, message will have the following substitu

• <number> = "1"3.4.23.21 PSU0039 : "An under current fault detected on power supply <number>." When event is generate

3.4.23.30 PSU0077 : "Power supply <number> vendor type mismatch detected." When event is generated, message will have the following su

3.4.23.39 PSU500 : "Unable to get the current server power status." 3.4.23.40 PSU501 : "Server is already powered ON." 3.4.23.41 P

• <number> = "1"3.4.23.51 PSU0904 : "Could not power down 240VA on power unit <number>." When event is generated, mess

• <number> = "1"3.4.24 Subcategory= PSU Absent [MessageID prefix =PSUA]3.4.24.1 PSUA0016 : "Power supply <number> is absen

3.4.25.11 PWR200 : "Enabling the Max Power Conservation Mode (MPCM) feature will disable the Extended Power Performance (EPP) feature." 3.4.

• <slot number> = ""3.4.25.27 PWR220 : "The Extended Power Performance (EPP) feature cannot be enabled because slot <slot numb

3.4.25.28 PWR221 : "The Extended Power Performance (EPP) feature is already disabled." 3.4.25.29 PWR222 : "The Extended Power Performan

<errors>" When event is generated, message will have the following substitutions:• <number of servers> = ""2.1.24 Subcateg

maintained." 3.4.25.51 PWR2202 : "The system is sleeping with lost processor context." 3.4.25.52 PWR2203 : "The system is sleeping

3.4.25.67 PWR8557 : "The System Input Power Cap is too low to be enforced using the current Power Supply configuration." 3.4.25.68 PWR8558 :

• <name> = "12v"3.4.27.20 RDU0031 : "The <name> voltage redundancy is lost." When event is generated, message will hav

3.4.28.7 RFL2007 : "Internal Dual SD Module <name> is writable." When event is generated, message will have the following substitution

3.4.30 Subcategory= FlexAddress SD [MessageID prefix =RFM]3.4.30.1 RFM1018 : "Removable Flash Media is absent." 3.4.30.2 RFM1019 : "Re

Module." 3.4.32 Subcategory= Security Event [MessageID prefix =SEC]3.4.32.1 SEC0000 : "The chassis is open." 3.4.32.2 SEC0001 : "

Technology (TXT) problem at boot." 3.4.32.24 SEC0045 : "Intel Trusted Execution Technology (TXT) is operating correctly." 3.4.32.25 SEC

address>." When event is generated, message will have the following substitutions:• <username> = "root"• <IP address> =

3.4.33.11 SEL1200 : "The system was reconfigured." 3.4.33.12 SEL1202 : "OEM system boot." 3.4.33.13 SEL1204 : "An unknown sys

Insufficient resources to maintain normal operations." 3.4.33.40 SEL1506 : "Lost communications with Chassis Group Member <number>.&qu

2.1.25.4 USR0008 : "The Default Login Warning feature is disabled." 2.1.25.5 USR0013 : "Insufficient user privileges to perform operati

• <number> = "1"3.4.34.4 SWC4005 : "A firmware or software incompatibility was corrected between iDRAC in slot <number> and

• <second component name> = " BIOS"• <second component location> = " in slot 1"3.4.34.12 SWC4013 : "A firmware or

3.4.34.16 SWC5003 : "System Controller (SC) has either stopped functioning or is updating a firmware version." 3.4.34.17 SWC5004 : "Sys

• <SDR> = " present"• <SEL> = " present"643

3.4.35.14 SYS115 : "The power cord sensor is non-functional." 3.4.35.15 SYS116 : "Unable to determine the status of the power cord.&quo

Lifecycle Controller is not enabled." 3.4.35.37 SYS138 : "Unable to start the collection of OS and Application Data because the server is tu

3.4.35.51 SYS181 : "Unable to collect OS and Application Data because the OS Collector is not installed on the iDRAC." 3.4.35.52 SYS182 : &q

• <name> = "Inlet"3.4.36.6 TMP0105 : "The system board <name> temperature is within range." When event is generated, m

• <name> = "Planer"3.4.36.15 TMP0114 : "The <name> temperature is greater than the upper warning threshold." When even

3.4.36.19 TMP0118 : "The system inlet temperature is less than the lower warning threshold." 3.4.36.20 TMP0119 : "The system inlet temp

• <interface name> = "GUI"2.1.25.19 USR0033 : "Login for <username> from <IP address> using <interface name> wa

• <number> = "1"3.4.36.41 TMP0201 : "CPU <number> temperature is less than the lower critical threshold." When event i

3.4.36.51 TMP502 : "The <sensor name> sensor has returned to a normal state with a value of <temperature> degrees Celsius." When

3.4.37 Subcategory= Temperature Statistics [MessageID prefix =TMPS]3.4.37.1 TMPS0100 : "Inlet temperature is above warning level for extended du

in Recovery mode." 3.4.38.19 UEFI0018 : "Lifecycle Controller (LC) is unable to complete a requested task or function and therefore is in Re

3.4.38.29 UEFI0032 : "Unable to initialize the TPM chip because the TPM chip is not functioning." 3.4.38.30 UEFI0034 : "A CMOS battery

• <PCIe device> = "Bus: 0 Dev: 0 Func: 18"3.4.38.47 UEFI0067 : "A PCIe link training failure is observed in <PCIe device> a

3.4.38.61 UEFI0106 : "One or more memory correctable training errors have occurred on memory slot: <slot>" When event is generated, me

3.4.38.68 UEFI0115 : "The Management Engine firmware has recovered from one or more correctable errors." 3.4.38.69 UEFI0116 : "One or m

Controller (LC) firmware was not accessible." 3.4.38.86 UEFI0142 : "Unable to enter System Service Mode (SSM) because the Lifecycle Controll

3.4.40.3 VFL0005 : "No vFlash partitions exist." 3.4.40.4 VFL0007 : "No vFlash SD card is present." 3.4.40.5 VFL0009 : "vFlas

2.1.25.25 USR0152 : "Unable to connect the remote VNC session, beacause an incorrect VNC password was entered from the IP <IP address>.&quo

• <name> = "vFlash"3.4.40.20 VFL1006 : "Removable Flash Media <name> is offline." When event is generated, message wil

• <name> = "vFlash"3.4.40.30 VFL1016 : "Media not present for Removable Flash Media <name>." When event is generated,

3.4.42.6 VLT0105 : "Processor module <name> voltage is within range." When event is generated, message will have the following substit

• <number> = "A"• <name> = "VRM"3.4.42.15 VLT0208 : "The memory module <number> <name> voltage is gre

3.4.42.22 VLT0215 : "The disk drive bay <name> voltage is greater than the upper critical threshold." When event is generated, message

• <name> = "A"3.4.42.32 VLT0225 : "The memory module <name> voltage is less than the lower critical threshold." When e

• <name> = "VRM"3.4.42.40 VLT0233 : "The mezzanine card <number> <name> voltage is greater than the upper critical th

3.4.42.47 VLT0304 : "CPU <number> <name> voltage is outside of range." When event is generated, message will have the following

• <voltage> = " 2"3.4.43 Subcategory= Virtual Console [MessageID prefix =VRM]3.4.43.1 VRM0009 : "No Virtual Media devices are cu

3.5.1 Subcategory= Job Control [MessageID prefix =JCP]3.5.1.1 JCP000 : "New" 3.5.2 Subcategory= Lifecycle Contr [MessageID prefix =LC]3.5.

2.1.25.30 USR0173 : "The Front Panel USB port switched automatically from iDRAC to operating system." 2.1.25.31 USR0174 : "The Front Pa

was found on the Lifecycle Controller." 3.5.4.21 RED020 : "Feature not supported on current version of USC." 3.5.4.22 RED021 : "Th

• <component name> = "Firmware updates available : Enterprise UEFI Diagnostics, 4225A2, 4225.4, OS Drivers Pack, 7.2.0.7, A00, BIOS"3.

• <operation task> = "AutoTask"3.5.4.47 RED046 : "A recurring operation of type <operation type> was unable to create a job

3.5.4.57 RED056 : "An internal error occurred. Unable to complete the specified operation." 3.5.4.58 RED057 : "An internal error occurr

3.5.4.70 RED076 : "Unable to create an Automatic Update schedule, because an invalid parameter is entered." 3.5.4.71 RED077 : "Unable t

• <component name> = "Component"• <available firmware version> = "Available"• <installed firmware version> = &qu

3.5.4.89 RED095 : "rSPI update for Diags failed." 3.5.4.90 RED0101 : "Rollback successfull." 3.5.5 Subcategory= FW Update Job [Me

• <parameter> = "Param1"3.5.5.22 SUP027 : "Missing required parameter <parameter>" When event is generated, message wi

3.5.5.23 SUP028 : "The GetRepoBasedUpdateList method did not complete successfully." 3.5.5.24 SUP029 : "Firmware versions on server mat

complete]" When event is generated, message will have the following substitutions:• <Extent of completion> = "50"679

• <process ID> = ""2.1.25.43 USR8502 : "Successfully closed Session: pid=<process ID> sid=<session ID>" When eve

3.5.5.48 SUP0122 : "Firmware update completed successfully" 3.5.5.49 SUP0123 : "Firmware update completed successfully. The RAC is in t

• <component> = "Lifecycle Controller"• <version> = "1.1.0.726, X12"3.5.5.70 SUP0517 : "Unable to update the <

3.5.5.74 SUP0522 : "Unable to update the BIOS firmware because write protection is enabled." 3.5.5.75 SUP0525 : "Unable to verify the d

3.5.5.89 SUP0539 : "Update Packages missing in the repository." 3.5.5.90 SUP1901 : "Firmware update initializing." 3.5.5.91 SUP190

3.5.7.3 SWU8502 : "A <update/reinstall/rollback> request was submitted to the Lifecycle Controller on server <slot number>." Whe

3.5.7.11 SWU8516 : "Unable to update the iDRAC firmware on the server in slot <slot number>. Transfer is not successful. ErrorCode=0x<er

3.5.7.19 SWU8524 : "Unable to update the iDRAC on the server in slot <slot number> firmware: ErrorCode=0x<error no>." When event

• <error no> = ""3.5.7.31 SWU8536 : "Unable to update the LKVM firmware, because the Image file could not be accessed. ErrorCode=

3.5.7.36 SWU8542 : "Unable to update the Active CMC firmware. The Image file transfer process was not successful." 3.5.7.37 SWU8543 : "

automatically turned off in 5 seconds." 3.6 Category: Work Notes3.6.1 Subcategory= UEFI Event [MessageID prefix =UEFI]3.6.1.1 UEFI0050 : "T

2.1.25.52 USR8511 : "Login was successful <description> from <address> (username=<username>, type=<session type>, sid=<

44.0 SysLog Event Notification Test Messages 4.1 Category: Audit4.1.1 Subcategory= BIOS Management [MessageID prefix =BIOS]4.1.1.1 BIOS102 : "A

4.1.2.6 CMC8511 : "Unable to synchronize the data in the Extended Storage removable flash media in the primary and secondary CMCs." 4.1.2.7

• <slot id> = ""4.1.2.17 CMC8542 : "The CMC <slot id> was restarted because of a manual reset." When event is generate

4.1.2.25 CMC8553 : "An internal error occurred and a failover condition is detected." 4.1.2.26 CMC8554 : "An internal network error occ

• <slot number> = ""4.1.2.39 CMC8570 : "The server slot <slot number> is disabled for DVD drive mapping." When event i

• <feature name> = ""4.1.4.3 FCD8503 : "The feature is activated in the chassis: <feature name>" When event is generat

4.1.6 Subcategory= IO Virtualization [MessageID prefix =IOV]4.1.6.1 IOV2009 : "The PCIe adapter in the PCIe slot <PCIe slot number> was re

• <requesting source name> = "iDRAC"4.1.7.12 ISM0011 : "The server operating system (OS) is unable to start the iDRAC Service Mod

4.1.7.19 ISM0018 : "The OS Collector application is successfully started on the server operating system (OS)." 4.1.7.20 ISM0019 : "The

4.1.9.5 LIC204 : "The License Manager database restore operation failed." 4.1.9.6 LIC205 : "License Manager database lock timeout has b

3.1.23 Subcategory= System Info [MessageID prefix =SYS]...3993.1.24 Subcategory= Temperature [Mess

2.2.1 Subcategory= Backup/Restore [MessageID prefix =BAR]2.2.1.1 BAR001 : "Export System Profile requested." 2.2.1.2 BAR002 : "Validat

4.1.10.2 LOG007 : "The previous log entry was repeated <log entry count> times." When event is generated, message will have the follow

4.1.13 Subcategory= Power Usage [MessageID prefix =POW]4.1.13.1 POW000 : "Power on permission error, chassis infrastructure not ready." 4.1

4.1.14.8 PSU8508 : "<error string>, PSU<slot number> firmware update is in progress." When event is generated, message will have

• <slotnum> = ""4.1.15 Subcategory= Power Usage [MessageID prefix =PWR]4.1.15.1 PWR2250 : "Unable to turn on the server because

4.1.15.12 PWR2262 : "The Intel Management Engine has reported an internal system error." 4.1.15.13 PWR2263 : "User ignored Power Supply

4.1.15.23 PWR8509 : "Unable to change the server power priority because Server Based Power Management mode is enabled." 4.1.15.24 PWR8510 :

4.1.15.25 PWR8511 : "Unable to set the CHASSIS_POWER_button_disable chassis power property." 4.1.15.26 PWR8512 : "CMC rebooted, because

AC." When event is generated, message will have the following substitutions:• <power value> = ""4.1.15.47 PWR8534 : "Unable

4.1.15.59 PWR8546 : "Chassis shutdown already in progress." 4.1.15.60 PWR8547 : "Chassis is already powered off." 4.1.15.61 PWR854

• <IOM slot name> = ""4.1.15.71 PWR8561 : "Unable to power on server <server number> because of iDRAC communication issue.&

Host System." 2.2.1.29 BAR029 : "Restoring Integrated Remote Access Controller firmware." 2.2.1.30 BAR030 : "Import System Profile

4.1.15.79 PWR8569 : "Unable to power cycle the server <slot number> because the server is off." When event is generated, message will

• <slot number> = ""4.1.15.88 PWR8578 : "Chassis Management Controller is unable to turn on the iDRAC on server-<slot number&g

4.1.15.96 PWR8586 : "Chassis Management Controller is unable to turn on server-<slot number> because it is not supported in the VRTX chassi

• <slot id> = ""4.1.15.106 PWR8596 : "Chassis Management Controller is unable to turn on server-<slot number> because PSU r

4.1.15.113 PWR8666 : "iKVM power cycle initiated." 4.1.15.114 PWR8667 : "Resetting iKVM to default settings." 4.1.15.115 PWR8668 :

4.1.16.7 RAC0723 : "The firmware version <version number> of the Chassis Management Controller is earlier than the required version <ver

4.1.17.7 RDU8509 : "CMC<slot number>: cannot failover, chassis is in non-redundant state" When event is generated, message will have t

• <slot number> = ""4.1.17.16 RDU8518 : "CMC<slot number>: active CMC<slot number> requests Standby CMC to go active

4.1.18 Subcategory= Software Config [MessageID prefix =SWC]4.1.18.1 SWC1916 : "Network Time Protocol server configuration has changed." 4.1

• <profile name> = ""4.1.18.14 SWC8508 : "Unable to capture Profile from server in slot <slot number>" When event is g

• <device name> = "PERC H310 Mini"2.2.1.51 BAR051 : "Performing Component Configuration Restore for Device : <device name>&

• <user name> = ""4.1.18.24 SWC8518 : "Unable to modify password of User <user name>: <error code>-<error message&

4.1.18.32 SWC8526 : "Unable to delete Chassis Group member <member id> (<DNS or IP address of member>)" When event is generated,

4.1.18.44 SWC8538 : "Unable to delete key for slot <slot number> of service account, due to problem saving key file." When event is ge

• <slot number> = ""4.1.18.53 SWC8604 : "Quick Deploy Profile: Server <server number> does not support configuration using

• <profile name> = ""4.1.18.61 SWC8612 : "Unable to fully extract boot device information from profile: <profile name>.&quo

• <slot number> = ""4.1.19.2 SWU8557 : "Invalid firmware: The uploaded firmware image does not contain a verification signature.&

4.1.21 Subcategory= Temperature [MessageID prefix =TMP]4.1.21.1 TMP8500 : "I/O Module <iom slot name> temperature exceeded operating range

4.1.22.6 USR0033 : "Login for <username> from <IP address> using <interface name> was incomplete." When event is generated

• <vendor ID> = "Vendor"• <manufacture name> = "Man"• <product ID> = "Prod"• <product name> = &q

4.1.22.19 USR0177 : "Configuring the Front Panel USB Port Mode to Automatic because the iDRAC is unable to retrieve the Front Panel USB Port Mode

2.2.1.58 BAR058 : "Validating NFS destination access." 2.2.1.59 BAR059 : "Validating CIFS destination access." 2.2.1.60 BAR060 : &

• <session ID> = ""4.1.22.32 USR8506 : "Successfully closed Session: sid=<session ID>" When event is generated, messag

4.2 Category: Configuration4.2.1 Subcategory= Backup/Restore [MessageID prefix =BAR]4.2.1.1 BAR054 : "System Reset or Lifecycle Controller Actio

4.2.4 Subcategory= Chassis Management Controller [MessageID prefix =CMC]4.2.4.1 CMC001 : "The command was successful." 4.2.4.2 CMC002 : &qu

4.2.5 Subcategory= Cert Mgmt [MessageID prefix =DH]4.2.5.1 DH010 : "Reset iDRAC to apply new certificate. Until iDRAC is reset, the old certific

not available." 4.2.7.4 FAN903 : "Cannot enable the Enhanced Cooling Mode because an unsupported fan is inserted in the Chassis." 4.2.7

4.2.8.5 FC005 : "The number of AttributeName array elements does not match the AttributeValue array element count." 4.2.8.6 FC006 : "Co

4.2.8.17 FC017 : "Unable to perform the operation due to an internal error in iDRAC." 4.2.9 Subcategory= Hardware Config [MessageID prefix

4.2.10.4 IOID004 : "Virtual Address Persistence Policy setting for Non-Auxiliary powered devices is changed to <restart type>." When e

• <port> = " 1"4.2.10.12 IOID115 : "Unable to configure the target settings properties of the NIC <controller> Port <por

4.2.10.13 IOID116 : "Applying I/O Identity settings based on current persistence policy settings." 4.2.10.14 IOID117 : "The operation t

information." 2.2.1.84 BAR084 : "Host System Service Tag does not match the Backup file Service Tag." 2.2.1.85 BAR085 : "Unable to

• <device name> = ""4.2.11.16 IOV102 : "A PCIe adapter <device name> is removed from <slot type> <slot number>.

4.2.11.25 IOV123 : "<"PCIE Slot" or "PERC VA"> <slot number or VA number> is unassigned/unmapped from extended se

• <slot number> = ""4.2.12 Subcategory= DRAC IP Address [MessageID prefix =IPA]4.2.12.1 IPA0100 : "The iDRAC IP Address changed

4.2.14.5 LC066 : "The Export Certificate operation is currently running." 4.2.14.6 LC067 : "Successfully exported SSL Certificate."

4.2.15.8 LOG503 : "Invalid value for the parameter, <parameter>." When event is generated, message will have the following substitutio

4.2.17.2 PCI5002 : "A PCIe card carrier that does not contain a PCIe card is inserted in the PCIe slot<slot number> ." When event is g

4.2.20.3 RAC052 : "Unable to create a configuration job because an existing configuration job is already in progress." 4.2.20.4 RAC053 : &qu

4.2.20.15 RAC064 : "iDRAC was successfully reset." 4.2.20.16 RAC065 : "iDRAC reset operation was not successful." 4.2.20.17 RAC066

4.2.20.33 RAC0610 : "The passphrase and confirm passphrase values entered do not match." 4.2.20.34 RAC0612 : "Cancelling the firmware u

4.2.20.49 RAC0661 : "Storage configuration operation - #(operation) is pending on the selected #{devicetype} : #{devicename}." 4.2.20.50 RAC

processing." 2.2.1.111 BAR111 : "Server Profile operation timed out." 2.2.1.112 BAR112 : "The system identifier in the Server Prof

4.2.20.53 RAC939 : "Unable to start the system configuration profile export or import operation." 4.2.20.54 RAC940 : "Unable to start t

recovery state," 4.2.20.77 RAC963 : "Unable to retrieve the status of Lifecycle Controller." 4.2.20.78 RAC964 : "Unable to perform

(PKCS12) file." 4.2.20.98 RAC985 : "Unable to configure the cfgServerBootOnce object." 4.2.20.99 RAC986 : "The "vmkey" s

4.2.20.107 RAC994 : "Unable to run the "jobqueue delete --all" command." 4.2.20.108 RAC995 : "Unable to retrieve the hardware

4.2.20.121 RAC1008 : "The Active Directory object DCLookupByUserDomain cannot be disabled." 4.2.20.122 RAC1009 : "The Active Directory

• <Job ID or ALL> = "123456789"4.2.20.144 RAC1033 : "Unable to retrieve the server component software inventory." 4.2.20.145

4.2.20.154 RAC1044 : "The Automatic Update (autoupdate) feature is not enabled." 4.2.20.155 RAC1045 : "Specifying ftp.dell.com as the c

4.2.20.162 RAC1052 : "The Automatic Backup (autobackup) feature is not enabled." 4.2.20.163 RAC1053 : "Unable to view the Automatic Bac

4.2.20.177 RAC1068 : "Unable to set minimum non critical threshold value of <System Board Inlet Temp>, because the value entered is greater

4.2.20.183 RAC1109 : "Unable to run the command, because an incorrect Share type is entered." 4.2.20.184 RAC1110 : "Unable to run the c

2.2.2.5 BIOS005 : "Mismatch in AttributeName and AttributeValue count" 2.2.2.6 BIOS006 : "Configuration job already created, cannot set

4.2.20.189 RAC1115 : "Unable to run the command, because of insufficient user privileges." 4.2.20.190 RAC1116 : "Unable to run the comm

(TSR) to a remote share." 4.2.20.211 RAC1141 : "The iDRAC firmware rollback operation was initiated." 4.2.20.212 RAC1142 : "Unable

4.2.20.215 RAC1145 : "The entered log type is invalid." 4.2.20.216 RAC1146 : "Unable to set the SNMPv3 username because SNMPv3 is not e

4.2.20.232 RAC1164 : "A remote diagnostics operation is currently running and not completed." 4.2.20.233 RAC1165 : "Unable to configure

4.2.20.235 RAC1168 : "The RACADM "getconfig" command will be deprecated in a future version of iDRAC firmware." 4.2.20.236 RAC1169

• <parameter> = "Param1"4.2.21.5 RED074 : "A required parameter is not present." 4.2.21.6 RED075 : "An Automatic Backup

4.2.23.12 STOR070 : "Unable to run the WS-MAN method <method name>, because an invalid parameter <parameter name> is entered." W

4.2.23.14 STOR072 : "iDRAC Service Module (ISM) is either not present or not running on the server OS." 4.2.23.15 STOR073 : "The iDRAC

present on the controller. Delete the preserved cache and retry the operation." 4.2.23.32 STOR0701 : "Storage objects are unavailable in the

4.2.24 Subcategory= Software Config [MessageID prefix =SWC]4.2.24.1 SWC0027 : "Successfully backed up a Server Profile by using the Lifecycle Co

2.2.2.17 BIOS017 : "Unable to delete vFlash pending one-time boot configuration" 2.2.2.18 BIOS018 : "Invalid BIOS Password." 2.2.2

share folder." 4.2.24.39 SWC0072 : "Unable to export the Tech Support Report to destination folder." 4.2.24.40 SWC0073 : "Unable t

4.2.24.56 SWC1930 : "The iDRAC Quick Sync inactivity timeout feature is enabled." 4.2.24.57 SWC1931 : "The iDRAC Quick Sync inactivity

4.2.25.7 SYS050 : "The system configuration XML file for import configuration is not compliant with schema nesting checks." 4.2.25.8 SYS051

4.2.25.22 SYS065 : "Input file for import configuration operation cannot be found or opened." 4.2.25.23 SYS066 : "No changes detected f

imported to the system." 4.2.25.41 SYS088 : "Estimated time for applying configuration changes is <configuration time> seconds."

• <job ID> = "JID_123456789098"4.2.25.58 SYS152 : "Erase operations for some System Erase tasks did not complete successfully.&qu

4.2.25.62 SYS156 : "Erase operations for System Erase tasks successfully completed." 4.2.25.63 SYS157 : "Unable to successfully complet

does not support TXT." 4.2.26.8 UEFI0045 : "Unable to enable the TXT feature because a TPM chip is not present." 4.2.26.9 UEFI0059 : &q

• <slot number> = "B2"4.2.26.21 UEFI0089 : "Incompatible x16 data bus width DIMM is installed on memory slot: <slot number>

4.2.26.28 UEFI0096 : "Unable to enable the Advanced ECC memory operating mode because the current DIMM population or system configuration does no

2.2.2.26 BIOS028 : "Unable to change the BIOS password using plain text because the password is currently being configured using a hash." 2.

4.2.26.35 UEFI0105 : "Unable to enable the Cluster on Die (COD) feature because of an unsupported memory configuration." 4.2.26.36 UEFI0113

• <controller name> = "RAID Controller in Slot 5"4.3.1.2 BAT1001 : "Battery on <controller name> was replaced." When e

4.3.1.11 BAT1023 : "The charge level for the battery on <controller name> is within normal limits." When event is generated, message w

4.3.1.20 BAT1033 : "The battery on <controller name> was removed." When event is generated, message will have the following substituti

• <controller name> = "RAID Controller in Slot 5"4.3.3.4 CTL12 : "An invalid SAS configuration has been detected on <Controlle

4.3.3.13 CTL37 : "A Patrol Read operation started for <controller name>." When event is generated, message will have the following sub

• <Controller name> = "RAID Controller in Slot 5"4.3.3.23 CTL48 : "A foreign configuration was detected on <controller name>

• <Controller name> = "RAID Controller in Slot 5"4.3.3.32 CTL62 : "<VD names> on <Controller name> has missing drives

• <controller slot> = "RAID Controller in Slot 5"4.3.3.41 CTL80 : "<controller name> experienced the following warning duri

4.3.3.50 CTL89 : "<controller name> is no longer fault tolerant because the peer controller is not available." When event is generated

• <slot number> = ""2.2.4 Subcategory= Chassis Management Controller [MessageID prefix =CMC]2.2.4.1 CMC001 : "The command was su

• <controller name> = "RAID Controller in Slot 5"• <new mode> = " HBA"4.3.3.59 CTL98 : "Security key assigned to

4.3.3.66 CTL202 : "Unable to open the firmware and driver configuration file <file name> of <controller name>." When event is ge

4.3.3.74 CTL210 : "Disabled persistent hot spare on <controller name>." When event is generated, message will have the following subst

4.3.4 Subcategory= Diagnostic [MessageID prefix =DIAG]4.3.4.1 DIAG0141 : "Hard Drive - No Hard Drive detected." 4.3.4.2 DIAG0142 : "Ha

• <Hex> = "0x44"• <Error Reason> = "Uncorrectable data error"4.3.4.9 DIAG0149 : "Optical Drive - no drive detecte

• <Drive Location> = "0"• <Serial Number> = "1013000398"4.3.4.17 DIAG8156 : "Tape Drive <Drive Location> -

• <Enclosure Management Module Name> = "EMM 0 in Enclosure 0 on Connector 1 of RAID Controller in Slot 2"4.3.5.3 ENC3 : "<Encl

• <enclosure name> = "Enclosure 0 on Connector 0 of RAID Controller in Slot 5"4.3.5.12 ENC26 : "<enclosure name> is not res

• <Fan Sensor Name> = "Fan 4 in Enclosure 0 on Connector 1 of RAID Controller in Slot 2"4.3.7 Subcategory= Unknown [MessageID prefix

• <virtual disk name> = ""4.3.7.9 FLDC1010 : "Caching is enabled on the <virtual disk name> with wwn = <World Wide Name&

3.3.3 Subcategory= Storage Contr [MessageID prefix =CTL]...5093.3.4 Subcategory= Diagnostic [MessageI

2.2.5 Subcategory= Cert Mgmt [MessageID prefix =DH]2.2.5.1 DH001 : "Resource needed to perform the operation is unavailable." 2.2.5.2 DH002

• <World Wide Name> = ""4.3.7.20 FLDC1022 : "The associated server of the Cache Device <physical disk name> with WWN = <

4.3.7.32 FLDC1034 : "A valid license is not installed for Fluid Cache." 4.3.7.33 FLDC1035 : "Configuration changes are not allowed, bec

• <PD Name> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"4.3.8.6 PDR6 : "<physical disk> is offline

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"4.3.8.16 PDR41 : "The clear operation on &

4.3.8.25 PDR52 : "A redundant path is broken." 4.3.8.26 PDR53 : "A redundant path has been restored for <PD Name>." When eve

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"4.3.8.35 PDR63 : "A bad disk block on <

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"4.3.8.44 PDR79 : "A user terminated Copyba

• <state> = "Spun Down"4.3.8.53 PDR93 : "Microcode update on <physical disk> has completed." When event is generated,

• <physical disk> = "Disk 5 in Enclosure 0 on Connector 0 of RAID Controller in Slot 5"4.3.8.63 PDR106 : "<physical disk> i

• <PCIe solid state device name> = "PCIe Solid-State Drive in Slot 9 in Bay 1"4.3.8.72 PDR116 : "Predictive failure reported for

• <new IP address> = "Unknown"• <old IP address> = "Unknown"2.2.6.9 DIS009 : "Notification of iDRAC IP address ch

• <physical disk name> = "Physical Disk 1:0:5 on Controller 0 at Connector 1"4.3.8.81 PDR213 : "The state of <physical disk na

4.3.9.6 PSU1005 : "<PSU sensor name> is switched on." When event is generated, message will have the following substitutions:• <PSU

4.3.11.5 SSD1005 : "Successfully initialized <PCIe SSD name>." When event is generated, message will have the following substitutions:

4.3.12.3 STOR7 : "The storage management instrumentation is performing an inventory refresh operation." 4.3.12.4 STOR8 : "Detected two

4.3.12.18 STOR0200 : "Array Manager is installed on the system." 4.3.12.19 STOR0201 : "Unable to determine whether the system has the m

4.3.12.31 STOR0506 : "Unable to create virtual disk." 4.3.12.32 STOR0507 : "Insufficient physical disk space on selected RAID controlle

4.3.14.5 TMP1003 : "<tempsensor name> has crossed the minimum failure threshold." When event is generated, message will have the follo

4.3.15.8 VDR12 : "<virtual disk> reconfiguration has started." When event is generated, message will have the following substitutions:

• <virtual disk> = "Virtual Disk 0 on Integrated RAID Controller 1"4.3.15.18 VDR31 : "Controller cache is preserved for missing o

• <virtual disk> = "Virtual Disk 0 on Integrated RAID Controller 1"4.3.15.28 VDR48 : "<VD Name> has inconsistent data."

2.2.6.11 DIS011 : "Auto Discovery client using customer signed client certificate." 2.2.6.12 DIS012 : "Auto Discovery client using fact

• <VD Name> = "Virtual Disk 0 on Integrated RAID Controller 1"4.3.15.37 VDR91 : "Consistency check for <virtual disk> has d

4.3.15.45 VDR100 : "<virtual disk> is unavailable because of incompatibilities with the current controller." When event is generated,

• <virtual disk name> = "Virtual Disk 1 (Virtual Disk 1) on Controller 0 (PERC 5/i Integrated)"4.3.15.53 VDR107 : "Successfully r

• <name> = "fail-safe"4.4.1.3 AMP0302 : "The system board <name> current is greater than the upper warning threshold."

• <name> = "fail-safe"4.4.1.12 AMP0311 : "Disk drive bay <name> current is within range." When event is generated, mes

• <current> = " 100.000"4.4.1.26 AMP404 : "The <sensor name> sensor detected an error with a value of <current> A.&qu

4.4.2.15 ASR201 : "The watchdog timer restarted the system at <day month date hh:mm:ss yyyy>." When event is generated, message will h

• <bay> = "1"4.4.3.13 BAT0012 : "The storage battery for disk drive bay <bay> has failed." When event is generated, me

4.4.3.21 BAT0030 : "The system board battery is reading low." 4.4.3.22 BAT0031 : "The system board battery status is unknown." 4.4

• <slot number> = ""4.4.4.10 CMC8520 : "The FRU on server <slot number> is not functioning." When event is generated,

not available." 2.2.7.4 FAN903 : "Cannot enable the Enhanced Cooling Mode because an unsupported fan is inserted in the Chassis." 2.2.7

4.4.4.19 CMC8534 : "Unable to turn on the server <slot number> because the power requirement request exceeds the power cap value." Whe

4.4.5.9 CPU0008 : "CPU <number> is disabled." When event is generated, message will have the following substitutions:• <number>

• <number> = "1"4.4.5.19 CPU0701 : "CPU <number> protocol error detected." When event is generated, message will have

4.4.5.29 CPU0806 : "CPU <number> voltage regulator module is incorrectly configure." When event is generated, message will have the fo

4.4.7.4 DIAG0114 : "Cache integrity test discrepancy <Error Reason>" When event is generated, message will have the following substitu

4.4.7.16 DIAG0213 : "System board - CMOS battery failure detected." 4.4.7.17 DIAG0221 : "System board - Interval timer not functional.&

• <Sensor Name> = "CPU1"• <Degrees> = "78"4.4.7.30 DIAG0315 : "Sensor: The (<Sensor Name>) reading <Degr

4.4.7.46 DIAG 0414 : "Cables - <Inverter Name> not detected." When event is generated, message will have the following substitutions:•

• <Name> = "CPU Thermistor"• <Decimal> = "7"• <Decimal> = "8"4.4.7.54 DIAG8003 : "Fan - Unable to

• <Decimal> = "1"4.4.7.64 DIAG8013 : "LCD <Name> doesnt support test commands." When event is generated, message will

2.2.8.5 FC005 : "The number of AttributeName array elements does not match the AttributeValue array element count." 2.2.8.6 FC006 : "Co

4.4.7.74 DIAG8171 : "PCIe - PCI device in physical Slot <decimal>, PciTag <hex>, is present but not responding" When event is ge

4.4.8.3 FAN0002 : "Fan <number> RPM is greater than the upper warning threshold." When event is generated, message will have the follo

• <number> = "1"4.4.8.13 FAN0012 : "<fan name> RPM is less than the lower warning threshold." When event is generated,

• <fan name> = "Fan 1"4.4.8.23 FAN0022 : "The <sensor name> sensor has failed, and the last recorded value by the sensor wa

• <port ID> = " 1"4.4.9.2 FC103 : "The FC <controller ID> port <port ID> network connection is successfully started.&

4.4.10.12 HWC1201 : "The sled <sled name> is removed from slot <slot number>." When event is generated, message will have the fo

4.4.10.21 HWC2008 : "A fabric mismatch detected for mezzanine card <number>." When event is generated, message will have the following

4.4.10.31 HWC3006 : "Unable to QuickDeploy server in slot <slot number>." When event is generated, message will have the following sub

4.4.10.42 HWC4018 : "A hardware incompatibility was corrected between <first component name><first component location location> and &

• <location> = "Main System Chassis"• <type> = " vFlash"• <state> = " NULL"4.4.10.49 HWC8008 : "T

2.2.8.17 FC017 : "Unable to perform the operation due to an internal error in iDRAC." 2.2.9 Subcategory= Hardware Config [MessageID prefix

4.4.11.2 IOV105 : "Unable to manage PCIE adapter <device name> located in <slot type> <slot number>." When event is genera

• <slot number> = ""4.4.11.14 IOV2005 : "The Chassis Management Controller (CMC) detected an issue in the 3.3 Volt Regulator of t

• <log type> = "Command"4.4.13.2 LOG322 : "The log size is no longer near the maximum capacity. Log type: <log type>."

4.4.14.5 MEM0004 : "Memory device at location <location> is disabled." When event is generated, message will have the following substi

4.4.14.14 MEM0021 : "Persistent correctable memory error limit reset for a memory device at location <location>." When event is genera

4.4.14.23 MEM1001 : "Memory device at location <location> failed to transition to a running state." When event is generated, message w

• <location> = "DIMM1"4.4.14.33 MEM1011 : "Memory device at location <location> is on-duty." When event is generated,

• <location> = "DIMM1"4.4.14.43 MEM1203 : "Memory is not redundant." 4.4.14.44 MEM1204 : "Memory mirror is redundant.&q

• <location> = "DIMM_A1"4.4.14.56 MEM6003 : "Memory device status is non-critical. Memory device location: <location>, Poss

4.4.14.66 MEM9003 : "Intel SMI 2 Memory interconnect <link number> has a correctable error." When event is generated, message will hav

2.2.10.4 IOID004 : "Virtual Address Persistence Policy setting for Non-Auxiliary powered devices is changed to <restart type>." When e

4.4.16 Subcategory= OS Event [MessageID prefix =OSE]4.4.16.1 OSE0000 : "A critical stop occurred during OS load." 4.4.16.2 OSE0001 : "

4.4.17.4 PCI1308 : "A PCI parity error was detected on a component at bus <bus> device <device> function <func>." When eve

4.4.17.10 PCI1320 : "A bus fatal error was detected on a component at bus <bus> device <device> function <func>." When eve

• <number> = "1"4.4.17.19 PCI1356 : "A bus uncorrectable error was detected on a component at slot <number>." When eve

4.4.17.27 PCI3000 : "Device option ROM on embedded NIC failed to support Link Tuning or FlexAddress." 4.4.17.28 PCI3001 : "Device optio

• <bus> = "1"• <device> = "1"• <func> = "1"4.4.17.37 PCI3010 : "A non-fatal IO error detected on

4.4.17.47 PCI3020 : "A low-severity issue is detected in a component of the bus <bus ID>, device 0, function <function ID>." Whe

4.4.18.3 PDR1002 : "A predictive failure detected on drive <number> in disk drive bay <bay>." When event is generated, message w

• <number> = "1"4.4.18.12 PDR1117 : "Drive <number> is operating normally." When event is generated, message will have

4.4.20 Subcategory= BIOS POST [MessageID prefix =PST]4.4.20.1 PST0000 : "Unrecognized Post Code." 4.4.20.2 PST0001 : "System Power On.

• <port> = " 1"2.2.10.12 IOID115 : "Unable to configure the target settings properties of the NIC <controller> Port <por

• <number> = "1"4.4.21.2 PSU0001 : "Power supply <number> failed." When event is generated, message will have the foll

• <number> = "1"4.4.21.12 PSU0032 : "The temperature for power supply <number> is in a warning range." When event is g

• <number> = "1"4.4.21.22 PSU0042 : "An output over current fault detected on power supply <number>." When event is ge

4.4.21.31 PSU0090 : "Power supply <number> wattage mismatch corrected." When event is generated, message will have the following subst

4.4.23 Subcategory= Power Usage [MessageID prefix =PWR]4.4.23.1 PWR200 : "Enabling the Max Power Conservation Mode (MPCM) feature will disable t

because the PSU in slot <slot number> is not a 3000 W PSU." When event is generated, message will have the following substitutions:• <sl

4.4.23.18 PWR221 : "The Extended Power Performance (EPP) feature is already disabled." 4.4.23.19 PWR222 : "The Extended Power Performan

4.4.23.37 PWR8557 : "The System Input Power Cap is too low to be enforced using the current Power Supply configuration." 4.4.23.38 PWR8558 :

• <name> = "12v"4.4.25.20 RDU0031 : "The <name> voltage redundancy is lost." When event is generated, message will hav

4.4.26.7 RFL2007 : "Internal Dual SD Module <name> is writable." When event is generated, message will have the following substitution

2.2.10.13 IOID116 : "Applying I/O Identity settings based on current persistence policy settings." 2.2.10.14 IOID117 : "The operation t

4.4.28 Subcategory= IDSDM Redundancy [MessageID prefix =RRDU]4.4.28.1 RRDU0001 : "Internal Dual SD Module is redundant." 4.4.28.2 RRDU0002

sensor." 4.4.29.14 SEC0052 : "Chassis intrusion sensor may have failed." 4.4.29.15 SEC0612 : "The default username and password is

• <network device location> = " A1"• <server location> = " 1"4.4.31.3 SWC4012 : "A firmware or software incompati

4.4.31.5 SWC5003 : "System Controller (SC) has either stopped functioning or is updating a firmware version." 4.4.31.6 SWC5004 : "Syste

• <SDR> = " present"• <SEL> = " present"884

4.4.32.14 SYS115 : "The power cord sensor is non-functional." 4.4.32.15 SYS116 : "Unable to determine the status of the power cord.&quo

Lifecycle Controller is not enabled." 4.4.32.37 SYS138 : "Unable to start the collection of OS and Application Data because the server is tu

4.4.32.51 SYS181 : "Unable to collect OS and Application Data because the OS Collector is not installed on the iDRAC." 4.4.32.52 SYS182 : &q

• <name> = "Inlet"4.4.33.6 TMP0105 : "The system board <name> temperature is within range." When event is generated, m

• <name> = "Planer"4.4.33.15 TMP0114 : "The <name> temperature is greater than the upper warning threshold." When even

• <device name> = ""2.2.11.16 IOV102 : "A PCIe adapter <device name> is removed from <slot type> <slot number>.

4.4.33.19 TMP0118 : "The system inlet temperature is less than the lower warning threshold." 4.4.33.20 TMP0119 : "The system inlet temp

• <number> = "1"4.4.33.41 TMP0201 : "CPU <number> temperature is less than the lower critical threshold." When event i

4.4.33.51 TMP502 : "The <sensor name> sensor has returned to a normal state with a value of <temperature> degrees Celsius." When

4.4.34 Subcategory= Temperature Statistics [MessageID prefix =TMPS]4.4.34.1 TMPS0100 : "Inlet temperature is above warning level for extended du

in Recovery mode." 4.4.35.19 UEFI0018 : "Lifecycle Controller (LC) is unable to complete a requested task or function and therefore is in Re

4.4.35.29 UEFI0032 : "Unable to initialize the TPM chip because the TPM chip is not functioning." 4.4.35.30 UEFI0034 : "A CMOS battery

• <PCIe device> = "Bus: 0 Dev: 0 Func: 18"4.4.35.47 UEFI0067 : "A PCIe link training failure is observed in <PCIe device> a

4.4.35.61 UEFI0106 : "One or more memory correctable training errors have occurred on memory slot: <slot>" When event is generated, me

4.4.35.68 UEFI0115 : "The Management Engine firmware has recovered from one or more correctable errors." 4.4.35.69 UEFI0116 : "One or m

Controller (LC) firmware was not accessible." 4.4.35.86 UEFI0142 : "Unable to enter System Service Mode (SSM) because the Lifecycle Controll

3.4.29 Subcategory= IDSDM Absent [MessageID prefix =RFLA]...6333.4.30 Subcategory= FlexAddress SD [Messag

2.2.11.25 IOV123 : "<"PCIE Slot" or "PERC VA"> <slot number or VA number> is unassigned/unmapped from extended se

4.4.36.8 VFL1015 : "Removable Flash Media <name> is writable." When event is generated, message will have the following substitutions:

4.4.38.7 VLT0204 : "The system board <name> voltage is outside of range." When event is generated, message will have the following sub

• <name> = "VRM"4.4.38.15 VLT0212 : "The disk drive bay <name> voltage is less than the lower warning threshold." When

• <name> = "VRM"4.4.38.24 VLT0221 : "The <name> voltage is greater than the upper critical threshold." When event is g

• <name> = "A"4.4.38.33 VLT0230 : "The mezzanine card <number> <name> voltage is less than the lower warning threshol

4.4.38.40 VLT0301 : "CPU <number> <name> voltage is less than the lower critical threshold." When event is generated, message wi

• <sensor name> = "System Board 1.5V PG"• <voltage> = " 1.4"4.4.38.48 VLT403 : "The <sensor name> sensor st

4.5.3.2 RED026 : "An internal error occurred while processing updates." 4.5.3.3 RED027 : "Insufficient space to upload the requested fi

• <job ID> = "JID"4.5.3.17 RED041 : "A recurring operation of type <operation type> was not created because the required li

• <operation type> = "AutoTask"4.5.3.25 RED049 : "The job <job ID> is deleted because the recurring operation <operation

• <slot number> = ""2.2.12 Subcategory= DRAC IP Address [MessageID prefix =IPA]2.2.12.1 IPA0100 : "The iDRAC IP Address changed

4.5.3.36 RED060 : "The specified repository catalog is not supported." 4.5.3.37 RED061 : "The job is successfully scheduled." 4.5.

4.5.3.50 RED081 : "The Automatic Update schedule already exists." 4.5.3.51 RED082 : "The requested job cannot be scheduled, because job

4.5.3.64 RED095 : "rSPI update for Diags failed." 4.5.4 Subcategory= FW Update Job [MessageID prefix =SUP]4.5.4.1 SUP026 : "The input

4.5.4.10 SUP0525 : "Unable to verify the digital signature of the Update Package." 4.5.4.11 SUP0526 : "Unable to continue with firmware

4.5.4.24 SUP0539 : "Update Packages missing in the repository." 4.5.5 Subcategory= Software Config [MessageID prefix =SWC]4.5.5.1 SWC5005 :

• <slot number> = ""4.5.6.8 SWU8513 : "Successfully updated the IOM infrastructure firmware of slot <slot number>." Wh

4.5.6.16 SWU8521 : "The firmware update operation of the iDRAC on the server in slot <slot number> was stopped. The selected Image file is

4.5.6.22 SWU8527 : "Successfully completed the iKVM firmware update." 4.5.6.23 SWU8528 : "Unable to update the iKVM firmware, because o

4.5.6.34 SWU8540 : "Unable to update the PSU firmware, because the transfer of Image file is not successful. ErrorCode=0x<error no>."

4.5.6.36 SWU8542 : "Unable to update the Active CMC firmware. The Image file transfer process was not successful." 4.5.6.37 SWU8543 : "

2.2.13.14 JCP014 : "Maximum jobs per queue exceeded." 2.2.13.15 JCP015 : "A running job cannot be deleted." 2.2.13.16 JCP016 : &qu

automatically turned off in 5 seconds." 4.6 Category: Work Notes4.6.1 Subcategory= UEFI Event [MessageID prefix =UEFI]4.6.1.1 UEFI0050 : "T

2.2.13.25 JCP024 : "Lifecycle Controller is in use. This job starts when Lifecycle Controller is available." 2.2.13.26 JCP025 : "Lifecy

• <parameter> = "parameter"2.2.14.17 LC017 : "Invalid value for the parameter, <parameter>." When event is generated,

2.2.14.18 LC018 : "Server certificate successfully modified. iDRAC will now restart and be unavailable during restart." 2.2.14.19 LC019 : &q

running." 2.2.14.44 LC045 : "An instance of CreateConfigJob is already running." 2.2.14.45 LC046 : "An instance of DownloadServerP

2.2.14.59 LC060 : "Lifecycle controller is currently not ready to take provisioning requests" 2.2.14.60 LC061 : "Lifecycle controller i

2.2.14.65 LC066 : "The Export Certificate operation is currently running." 2.2.14.66 LC067 : "Successfully exported SSL Certificate.&qu

• <parameters> = "parameters"2.2.15.5 LIC904 : "Could not connect to network share." 2.2.15.6 LIC905 : "The LicenseName