4.3.1.20 BAT1033 : "The battery on <controller name> was removed."
When event is generated, message will have the following substitutions:
• <controller name> = "RAID Controller in Slot 5"
4.3.1.21 BAT1034 : "The battery properties for <controller name> have changed."
When event is generated, message will have the following substitutions:
• <controller name> = "RAID Controller in Slot 5"
4.3.1.22 BAT1035 : "The battery temperature on <controller name> is above the normal
operating temperature."
When event is generated, message will have the following substitutions:
• <controller name> = "Controller 1 (PERC H800 Adapter)"
4.3.1.23 BAT1036 : "The battery on <controller name> is discharging."
When event is generated, message will have the following substitutions:
• <controller name> = "Controller 1 (PERC H800 Adapter)"
4.3.2 Subcategory= Cable [MessageID prefix =CBL]
4.3.2.1 CBL8500 : "SAS cable <cable id> to expander <expander id> is not connected."
When event is generated, message will have the following substitutions:
• <cable id> = ""
4.3.2.2 CBL8501 : "SAS cable <cable id> is connected to the incorrect expander."
When event is generated, message will have the following substitutions:
• <cable id> = ""
4.3.3 Subcategory= Storage Contr [MessageID prefix =CTL]
4.3.3.1 CTL1 : "Controller event log: <message>"
When event is generated, message will have the following substitutions:
• <message> = "A foreign configuration was detected on RAID Controller in Slot 2"
4.3.3.2 CTL10 : "<Controller name> alarm has been tested."
When event is generated, message will have the following substitutions:
• <Controller name> = "RAID Controller in Slot 5"
4.3.3.3 CTL11 : "Configuration on <controller name> was reset."
When event is generated, message will have the following substitutions:
783
Komentáře k této Příručce